{ "maxDevices":169, "devices": [ { "name":"SC450", "deviceName":"SC", "category":"Corrosion", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/korrosions-testgeraet-saltevent-typ-sc", "randomNumber":"19", "norms": [ { "id":"730", "name":"ASTM B 117 (2011)", "description":"Standard Practice for Operating Salt Spray\u00a0(Fog) Apparatus", "normType":"Standard Salt Mist Tests" } , { "id":"731", "name":"ASTM B 368 (2014)", "description":"Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)", "normType":"Standard Salt Mist Tests" } , { "id":"732", "name":"ASTM G 85; A1 (2011)", "description":"Standard Practice for Modified Salt Spray (Fog) Testing", "normType":"Standard Salt Mist Tests" } , { "id":"735", "name":"ASTM G 85; A4 (2011)", "description":"Standard Practice for Modified Salt Spray\u00a0(Fog) Testing", "normType":"Standard Salt Mist Tests" } , { "id":"743", "name":"Bosch N42AP102", "description":"Bosch Norm Salt Spray Test NSS", "normType":"Standard Salt Mist Tests" } , { "id":"746", "name":"BS 2011 P. 2.1 Ka (1982)", "description":"Environmental testing. Tests. Test Ef. Impact, pendulum hammer", "normType":"Standard Salt Mist Tests" } , { "id":"762", "name":"DIN 50017 KK, KFW, KTW (1982) ", "description":"replaced by DIN EN ISO 6270-2", "normType":"Condensed Water Test" } , { "id":"763", "name":"DIN 50018 (2013)", "description":"Testing in a saturated atmosphere in the presence of sulfur dioxide", "normType":"Condensed Water Test" } , { "id":"764", "name":"DIN 50021; CASS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"765", "name":"DIN 50021; ESS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"766", "name":"DIN 50021; NSS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"775", "name":"DIN EN ISO 6270-2 (KFW) AHT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"776", "name":"DIN EN ISO 6270-2 (KK) CH (2005)", "description":"Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres ", "normType":"Condensed Water Test" } , { "id":"777", "name":"DIN EN ISO 6270-2 (KTW) AT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"778", "name":"DIN EN ISO 6988 (1997)", "description":"Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture", "normType":"Condensed Water Test" } , { "id":"779", "name":"DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres -- Salt spray tests", "normType":"Standard Salt Mist Tests" } , { "id":"794", "name":"FIAT 50180 A1;A2;A3;B1 ", "description":"Corrosion Tests", "normType":"Standard Salt Mist Tests" } , { "id":"803", "name":"GME 60202", "description":"Determintation of the resistance of automotive components to high humidity environments", "normType":"Condensed Water Test" } , { "id":"804", "name":"GME 60206 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by SALT SPRAY FOG TESTING", "normType":"Standard Salt Mist Tests" } , { "id":"805", "name":"GME 60207 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by Copper Accelerated Acetic Acid Salt Spray (CASS) ", "normType":"Standard Salt Mist Tests" } , { "id":"817", "name":"IEC 60068-2-11 Ka (2000)", "description":"Environmental testing - Part 2: Tests; test Ka: Salt mist ", "normType":"Standard Salt Mist Tests" } , { "id":"844", "name":"ISO 9227; AASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"845", "name":"ISO 9227; CASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"846", "name":"ISO 9227; NSS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"857", "name":"JIS Z 2371 (2000)", "description":"Methods of salt spray testing ", "normType":"Standard Salt Mist Tests" } , { "id":"872", "name":"MIL-STD-202 H, Method101 E ", "description":"Electronic and electrical component parts", "normType":"Standard Salt Mist Tests" } , { "id":"896", "name":"MIL-STD-810 G, Method 509.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standard Salt Mist Tests" } , { "id":"909", "name":"Renault D171058", "description":"Natural Salt Spray Test", "normType":"Standard Salt Mist Tests" } , { "id":"922", "name":"VDA 621-421(03\/1985) ", "description":"Vehicle Paint in Condensed Water Climates", "normType":"Condensed Water Test" } , { "id":"938", "name":"Volvo STD 5711, 102 (1995)", "description":"Corrosion Test in artificial atmospheres \u2013 salt spray tests", "normType":"Standard Salt Mist Tests" } ] } , { "name":"SC1000", "deviceName":"SC", "category":"Corrosion", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/korrosions-testgeraet-saltevent-typ-sc", "randomNumber":"26", "norms": [ { "id":"730", "name":"ASTM B 117 (2011)", "description":"Standard Practice for Operating Salt Spray\u00a0(Fog) Apparatus", "normType":"Standard Salt Mist Tests" } , { "id":"731", "name":"ASTM B 368 (2014)", "description":"Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)", "normType":"Standard Salt Mist Tests" } , { "id":"732", "name":"ASTM G 85; A1 (2011)", "description":"Standard Practice for Modified Salt Spray (Fog) Testing", "normType":"Standard Salt Mist Tests" } , { "id":"735", "name":"ASTM G 85; A4 (2011)", "description":"Standard Practice for Modified Salt Spray\u00a0(Fog) Testing", "normType":"Standard Salt Mist Tests" } , { "id":"743", "name":"Bosch N42AP102", "description":"Bosch Norm Salt Spray Test NSS", "normType":"Standard Salt Mist Tests" } , { "id":"746", "name":"BS 2011 P. 2.1 Ka (1982)", "description":"Environmental testing. Tests. Test Ef. Impact, pendulum hammer", "normType":"Standard Salt Mist Tests" } , { "id":"762", "name":"DIN 50017 KK, KFW, KTW (1982) ", "description":"replaced by DIN EN ISO 6270-2", "normType":"Condensed Water Test" } , { "id":"763", "name":"DIN 50018 (2013)", "description":"Testing in a saturated atmosphere in the presence of sulfur dioxide", "normType":"Condensed Water Test" } , { "id":"764", "name":"DIN 50021; CASS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"765", "name":"DIN 50021; ESS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"766", "name":"DIN 50021; NSS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"775", "name":"DIN EN ISO 6270-2 (KFW) AHT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"776", "name":"DIN EN ISO 6270-2 (KK) CH (2005)", "description":"Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres ", "normType":"Condensed Water Test" } , { "id":"777", "name":"DIN EN ISO 6270-2 (KTW) AT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"778", "name":"DIN EN ISO 6988 (1997)", "description":"Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture", "normType":"Condensed Water Test" } , { "id":"779", "name":"DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres -- Salt spray tests", "normType":"Standard Salt Mist Tests" } , { "id":"794", "name":"FIAT 50180 A1;A2;A3;B1 ", "description":"Corrosion Tests", "normType":"Standard Salt Mist Tests" } , { "id":"803", "name":"GME 60202", "description":"Determintation of the resistance of automotive components to high humidity environments", "normType":"Condensed Water Test" } , { "id":"804", "name":"GME 60206 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by SALT SPRAY FOG TESTING", "normType":"Standard Salt Mist Tests" } , { "id":"805", "name":"GME 60207 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by Copper Accelerated Acetic Acid Salt Spray (CASS) ", "normType":"Standard Salt Mist Tests" } , { "id":"817", "name":"IEC 60068-2-11 Ka (2000)", "description":"Environmental testing - Part 2: Tests; test Ka: Salt mist ", "normType":"Standard Salt Mist Tests" } , { "id":"844", "name":"ISO 9227; AASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"845", "name":"ISO 9227; CASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"846", "name":"ISO 9227; NSS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"857", "name":"JIS Z 2371 (2000)", "description":"Methods of salt spray testing ", "normType":"Standard Salt Mist Tests" } , { "id":"872", "name":"MIL-STD-202 H, Method101 E ", "description":"Electronic and electrical component parts", "normType":"Standard Salt Mist Tests" } , { "id":"896", "name":"MIL-STD-810 G, Method 509.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standard Salt Mist Tests" } , { "id":"909", "name":"Renault D171058", "description":"Natural Salt Spray Test", "normType":"Standard Salt Mist Tests" } , { "id":"922", "name":"VDA 621-421(03\/1985) ", "description":"Vehicle Paint in Condensed Water Climates", "normType":"Condensed Water Test" } , { "id":"938", "name":"Volvo STD 5711, 102 (1995)", "description":"Corrosion Test in artificial atmospheres \u2013 salt spray tests", "normType":"Standard Salt Mist Tests" } ] } , { "name":"SC\/KWT450", "deviceName":"SC KWT", "category":"Corrosion", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/korrosions-wechseltestgeraet-saltevent-typ-sc-kwt", "randomNumber":"24", "norms": [ { "id":"730", "name":"ASTM B 117 (2011)", "description":"Standard Practice for Operating Salt Spray\u00a0(Fog) Apparatus", "normType":"Standard Salt Mist Tests" } , { "id":"731", "name":"ASTM B 368 (2014)", "description":"Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)", "normType":"Standard Salt Mist Tests" } , { "id":"732", "name":"ASTM G 85; A1 (2011)", "description":"Standard Practice for Modified Salt Spray (Fog) Testing", "normType":"Standard Salt Mist Tests" } , { "id":"735", "name":"ASTM G 85; A4 (2011)", "description":"Standard Practice for Modified Salt Spray\u00a0(Fog) Testing", "normType":"Standard Salt Mist Tests" } , { "id":"743", "name":"Bosch N42AP102", "description":"Bosch Norm Salt Spray Test NSS", "normType":"Standard Salt Mist Tests" } , { "id":"744", "name":"Bosch N42AP108 (12\/1984) 3.1 und 3.2", "description":"Klimapr\u00fcfungen - Kombinierte Salzpr\u00fchnebel-Feuchtepr\u00fcfung", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"746", "name":"BS 2011 P. 2.1 Ka (1982)", "description":"Environmental testing. Tests. Test Ef. Impact, pendulum hammer", "normType":"Standard Salt Mist Tests" } , { "id":"762", "name":"DIN 50017 KK, KFW, KTW (1982) ", "description":"replaced by DIN EN ISO 6270-2", "normType":"Condensed Water Test" } , { "id":"763", "name":"DIN 50018 (2013)", "description":"Testing in a saturated atmosphere in the presence of sulfur dioxide", "normType":"Condensed Water Test" } , { "id":"764", "name":"DIN 50021; CASS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"765", "name":"DIN 50021; ESS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"766", "name":"DIN 50021; NSS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"775", "name":"DIN EN ISO 6270-2 (KFW) AHT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"776", "name":"DIN EN ISO 6270-2 (KK) CH (2005)", "description":"Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres ", "normType":"Condensed Water Test" } , { "id":"777", "name":"DIN EN ISO 6270-2 (KTW) AT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"778", "name":"DIN EN ISO 6988 (1997)", "description":"Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture", "normType":"Condensed Water Test" } , { "id":"779", "name":"DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres -- Salt spray tests", "normType":"Standard Salt Mist Tests" } , { "id":"794", "name":"FIAT 50180 A1;A2;A3;B1 ", "description":"Corrosion Tests", "normType":"Standard Salt Mist Tests" } , { "id":"803", "name":"GME 60202", "description":"Determintation of the resistance of automotive components to high humidity environments", "normType":"Condensed Water Test" } , { "id":"804", "name":"GME 60206 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by SALT SPRAY FOG TESTING", "normType":"Standard Salt Mist Tests" } , { "id":"805", "name":"GME 60207 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by Copper Accelerated Acetic Acid Salt Spray (CASS) ", "normType":"Standard Salt Mist Tests" } , { "id":"817", "name":"IEC 60068-2-11 Ka (2000)", "description":"Environmental testing - Part 2: Tests; test Ka: Salt mist ", "normType":"Standard Salt Mist Tests" } , { "id":"825", "name":"IEC 60068-2-52;Kb severity 1-6 (1996)", "description":"Environmental testing - Part 2: Tests, Test Kb: Salt mist, cyclic (sodium chloride solution)", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"844", "name":"ISO 9227; AASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"845", "name":"ISO 9227; CASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"846", "name":"ISO 9227; NSS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"857", "name":"JIS Z 2371 (2000)", "description":"Methods of salt spray testing ", "normType":"Standard Salt Mist Tests" } , { "id":"872", "name":"MIL-STD-202 H, Method101 E ", "description":"Electronic and electrical component parts", "normType":"Standard Salt Mist Tests" } , { "id":"896", "name":"MIL-STD-810 G, Method 509.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standard Salt Mist Tests" } , { "id":"909", "name":"Renault D171058", "description":"Natural Salt Spray Test", "normType":"Standard Salt Mist Tests" } , { "id":"920", "name":"VDA 621-415 ", "description":"Zyklische Korrosionspr\u00fcfung von automobilen Komponenten\/Bauteilen \/ Pr\u00fcfung der G\u00fcte von Korrosionschutzschichten mit einer belastungsorientierten Korrosionspr\u00fcfungsmethode", "normType":"Corrosion Alternating Tests " } , { "id":"922", "name":"VDA 621-421(03\/1985) ", "description":"Vehicle Paint in Condensed Water Climates", "normType":"Condensed Water Test" } , { "id":"938", "name":"Volvo STD 5711, 102 (1995)", "description":"Corrosion Test in artificial atmospheres \u2013 salt spray tests", "normType":"Standard Salt Mist Tests" } ] } , { "name":"SC\/KWT1000", "deviceName":"SC KWT", "category":"Corrosion", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/korrosions-wechseltestgeraet-saltevent-typ-sc-kwt", "randomNumber":"9", "norms": [ { "id":"730", "name":"ASTM B 117 (2011)", "description":"Standard Practice for Operating Salt Spray\u00a0(Fog) Apparatus", "normType":"Standard Salt Mist Tests" } , { "id":"731", "name":"ASTM B 368 (2014)", "description":"Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)", "normType":"Standard Salt Mist Tests" } , { "id":"732", "name":"ASTM G 85; A1 (2011)", "description":"Standard Practice for Modified Salt Spray (Fog) Testing", "normType":"Standard Salt Mist Tests" } , { "id":"735", "name":"ASTM G 85; A4 (2011)", "description":"Standard Practice for Modified Salt Spray\u00a0(Fog) Testing", "normType":"Standard Salt Mist Tests" } , { "id":"743", "name":"Bosch N42AP102", "description":"Bosch Norm Salt Spray Test NSS", "normType":"Standard Salt Mist Tests" } , { "id":"744", "name":"Bosch N42AP108 (12\/1984) 3.1 und 3.2", "description":"Klimapr\u00fcfungen - Kombinierte Salzpr\u00fchnebel-Feuchtepr\u00fcfung", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"746", "name":"BS 2011 P. 2.1 Ka (1982)", "description":"Environmental testing. Tests. Test Ef. Impact, pendulum hammer", "normType":"Standard Salt Mist Tests" } , { "id":"762", "name":"DIN 50017 KK, KFW, KTW (1982) ", "description":"replaced by DIN EN ISO 6270-2", "normType":"Condensed Water Test" } , { "id":"763", "name":"DIN 50018 (2013)", "description":"Testing in a saturated atmosphere in the presence of sulfur dioxide", "normType":"Condensed Water Test" } , { "id":"764", "name":"DIN 50021; CASS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"765", "name":"DIN 50021; ESS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"766", "name":"DIN 50021; NSS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"775", "name":"DIN EN ISO 6270-2 (KFW) AHT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"776", "name":"DIN EN ISO 6270-2 (KK) CH (2005)", "description":"Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres ", "normType":"Condensed Water Test" } , { "id":"777", "name":"DIN EN ISO 6270-2 (KTW) AT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"778", "name":"DIN EN ISO 6988 (1997)", "description":"Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture", "normType":"Condensed Water Test" } , { "id":"794", "name":"FIAT 50180 A1;A2;A3;B1 ", "description":"Corrosion Tests", "normType":"Standard Salt Mist Tests" } , { "id":"803", "name":"GME 60202", "description":"Determintation of the resistance of automotive components to high humidity environments", "normType":"Condensed Water Test" } , { "id":"804", "name":"GME 60206 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by SALT SPRAY FOG TESTING", "normType":"Standard Salt Mist Tests" } , { "id":"805", "name":"GME 60207 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by Copper Accelerated Acetic Acid Salt Spray (CASS) ", "normType":"Standard Salt Mist Tests" } , { "id":"817", "name":"IEC 60068-2-11 Ka (2000)", "description":"Environmental testing - Part 2: Tests; test Ka: Salt mist ", "normType":"Standard Salt Mist Tests" } , { "id":"825", "name":"IEC 60068-2-52;Kb severity 1-6 (1996)", "description":"Environmental testing - Part 2: Tests, Test Kb: Salt mist, cyclic (sodium chloride solution)", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"844", "name":"ISO 9227; AASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"845", "name":"ISO 9227; CASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"846", "name":"ISO 9227; NSS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"857", "name":"JIS Z 2371 (2000)", "description":"Methods of salt spray testing ", "normType":"Standard Salt Mist Tests" } , { "id":"872", "name":"MIL-STD-202 H, Method101 E ", "description":"Electronic and electrical component parts", "normType":"Standard Salt Mist Tests" } , { "id":"896", "name":"MIL-STD-810 G, Method 509.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standard Salt Mist Tests" } , { "id":"909", "name":"Renault D171058", "description":"Natural Salt Spray Test", "normType":"Standard Salt Mist Tests" } , { "id":"920", "name":"VDA 621-415 ", "description":"Zyklische Korrosionspr\u00fcfung von automobilen Komponenten\/Bauteilen \/ Pr\u00fcfung der G\u00fcte von Korrosionschutzschichten mit einer belastungsorientierten Korrosionspr\u00fcfungsmethode", "normType":"Corrosion Alternating Tests " } , { "id":"922", "name":"VDA 621-421(03\/1985) ", "description":"Vehicle Paint in Condensed Water Climates", "normType":"Condensed Water Test" } , { "id":"938", "name":"Volvo STD 5711, 102 (1995)", "description":"Corrosion Test in artificial atmospheres \u2013 salt spray tests", "normType":"Standard Salt Mist Tests" } ] } , { "name":"SC\/UKWT1000", "deviceName":"SC UKWT", "category":"Corrosion", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/umluft-korrosions-wechseltestgeraet-saltevent-typ-scukwt", "randomNumber":"9", "norms": [ { "id":"730", "name":"ASTM B 117 (2011)", "description":"Standard Practice for Operating Salt Spray\u00a0(Fog) Apparatus", "normType":"Standard Salt Mist Tests" } , { "id":"731", "name":"ASTM B 368 (2014)", "description":"Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)", "normType":"Standard Salt Mist Tests" } , { "id":"732", "name":"ASTM G 85; A1 (2011)", "description":"Standard Practice for Modified Salt Spray (Fog) Testing", "normType":"Standard Salt Mist Tests" } , { "id":"733", "name":"ASTM G 85; A2 (2011)", "description":"Standard Practice for Modified Salt Spray\u00a0(Fog) Testing", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"734", "name":"ASTM G 85; A3 (2011) SWAAT", "description":"Standard Practice for Modified Salt Spray\u00a0(Fog) Testing", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"735", "name":"ASTM G 85; A4 (2011)", "description":"Standard Practice for Modified Salt Spray\u00a0(Fog) Testing", "normType":"Standard Salt Mist Tests" } , { "id":"736", "name":"ASTM G 85; A5 (2011) ", "description":"Standard Practice for Modified Salt Spray\u00a0(Fog) Testing", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"743", "name":"Bosch N42AP102", "description":"Bosch Norm Salt Spray Test NSS", "normType":"Standard Salt Mist Tests" } , { "id":"744", "name":"Bosch N42AP108 (12\/1984) 3.1 und 3.2", "description":"Klimapr\u00fcfungen - Kombinierte Salzpr\u00fchnebel-Feuchtepr\u00fcfung", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"745", "name":"Bosch N42AP108 (12\/1984) 3.3", "description":"Klimapr\u00fcfungen - Kombinierte Salzpr\u00fchnebel-Feuchtepr\u00fcfung", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"746", "name":"BS 2011 P. 2.1 Ka (1982)", "description":"Environmental testing. Tests. Test Ef. Impact, pendulum hammer", "normType":"Standard Salt Mist Tests" } , { "id":"762", "name":"DIN 50017 KK, KFW, KTW (1982) ", "description":"replaced by DIN EN ISO 6270-2", "normType":"Condensed Water Test" } , { "id":"764", "name":"DIN 50021; CASS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"765", "name":"DIN 50021; ESS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"766", "name":"DIN 50021; NSS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"773", "name":"DIN EN ISO 11997-1", "description":"Paints and varnishes\u00a0- Determination of resistance to cyclic corrosion conditions\u00a0- Part\u00a01: Wet (salt fog)\/dry\/humidity", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"774", "name":"DIN EN ISO 4623-2 (2004) Filiform", "description":"Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"775", "name":"DIN EN ISO 6270-2 (KFW) AHT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"776", "name":"DIN EN ISO 6270-2 (KK) CH (2005)", "description":"Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres ", "normType":"Condensed Water Test" } , { "id":"777", "name":"DIN EN ISO 6270-2 (KTW) AT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"794", "name":"FIAT 50180 A1;A2;A3;B1 ", "description":"Corrosion Tests", "normType":"Standard Salt Mist Tests" } , { "id":"796", "name":"Ford CETP :00.00-L-467 ", "description":"Laboratory Accelerated Cyclic Corrosion Test", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"803", "name":"GME 60202", "description":"Determintation of the resistance of automotive components to high humidity environments", "normType":"Condensed Water Test" } , { "id":"804", "name":"GME 60206 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by SALT SPRAY FOG TESTING", "normType":"Standard Salt Mist Tests" } , { "id":"805", "name":"GME 60207 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by Copper Accelerated Acetic Acid Salt Spray (CASS) ", "normType":"Standard Salt Mist Tests" } , { "id":"806", "name":"GME 9540P (1997)", "description":"Accelerated Corrosion Test ", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"807", "name":"GMW 14872 (2013)", "description":"Cyclic Corrosion Laboratory Test ", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"808", "name":"GMW 3172 (2012) ", "description":"General Specification for Electrical\/Electronic Components \u2013 Environmental\/Durability ", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"817", "name":"IEC 60068-2-11 Ka (2000)", "description":"Environmental testing - Part 2: Tests; test Ka: Salt mist ", "normType":"Standard Salt Mist Tests" } , { "id":"825", "name":"IEC 60068-2-52;Kb severity 1-6 (1996)", "description":"Environmental testing - Part 2: Tests, Test Kb: Salt mist, cyclic (sodium chloride solution)", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"834", "name":"ISO 14993 (2001)", "description":"Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, \"dry\" and \"wet\" conditions", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"844", "name":"ISO 9227; AASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"845", "name":"ISO 9227; CASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"846", "name":"ISO 9227; NSS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"848", "name":"JASO M 610 (1992)", "description":"Cosmetic Corrosion Test Method for Automotive Parts, Material & Surface Treatment", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"857", "name":"JIS Z 2371 (2000)", "description":"Methods of salt spray testing ", "normType":"Standard Salt Mist Tests" } , { "id":"872", "name":"MIL-STD-202 H, Method101 E ", "description":"Electronic and electrical component parts", "normType":"Standard Salt Mist Tests" } , { "id":"896", "name":"MIL-STD-810 G, Method 509.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standard Salt Mist Tests" } , { "id":"900", "name":"Nissan M 0007 CCT I, II, IV (1986)", "description":"Corrosion Tests", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"901", "name":"Nissan M 0158 CCT I; IV ", "description":"Methods of Compound Corrosion Test", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"909", "name":"Renault D171058", "description":"Natural Salt Spray Test", "normType":"Standard Salt Mist Tests" } , { "id":"910", "name":"Renault D172028\/--C; ECC1 ", "description":"Essai de corrosion par changement automatique des phases BS humidite et sechage (ECC1)", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"911", "name":"SAE J2334 (2003)", "description":"Laboratory Cyclic Corrosion Test ", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"916", "name":"Toyota TSH 1555G, Meth. A + B ", "description":"Test Method for Accelerated Corrosion under Complex Environment", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"917", "name":"Toyota TSH 1555G, Meth. C ", "description":"Test Method for Accelerated Corrosion under Complex Environment", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"920", "name":"VDA 621-415 ", "description":"Zyklische Korrosionspr\u00fcfung von automobilen Komponenten\/Bauteilen \/ Pr\u00fcfung der G\u00fcte von Korrosionschutzschichten mit einer belastungsorientierten Korrosionspr\u00fcfungsmethode", "normType":"Corrosion Alternating Tests " } , { "id":"922", "name":"VDA 621-421(03\/1985) ", "description":"Vehicle Paint in Condensed Water Climates", "normType":"Condensed Water Test" } , { "id":"930", "name":"Volkswagen PV 1210 ", "description":"Vehicle Parts - Testing of Resistance to Environmental Cycle Test (+80\/-40) \u00b0C", "normType":"Automobil Standards" } , { "id":"932", "name":"Volkswagen PV 3.15.3(12\/2011)", "description":"Farben und Lacke \/ Pr\u00fcfung der Korrosionsbest\u00e4ndigkeit von KTL-Beschichtungen auf verzinkten Stahlblechen \/ Pr\u00fcfung der Korrosionsbest\u00e4ndigkeit von KTL-Beschichtungen auf verzinkten Stahlblechen", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"936", "name":"Volvo STD 1027,1375", "description":"Corrosion resistance \/ Accelerated atmospheric corrosion testing - Volvo Indoor Corrosion Test (VICT)", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"938", "name":"Volvo STD 5711, 102 (1995)", "description":"Corrosion Test in artificial atmospheres \u2013 salt spray tests", "normType":"Standard Salt Mist Tests" } ] } , { "name":"SC1000 15-60 IU", "deviceName":"SC", "category":"Corrosion", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/korrosions-testgeraet-saltevent-typ-sc", "randomNumber":"50", "norms": [ { "id":"730", "name":"ASTM B 117 (2011)", "description":"Standard Practice for Operating Salt Spray\u00a0(Fog) Apparatus", "normType":"Standard Salt Mist Tests" } , { "id":"731", "name":"ASTM B 368 (2014)", "description":"Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)", "normType":"Standard Salt Mist Tests" } , { "id":"732", "name":"ASTM G 85; A1 (2011)", "description":"Standard Practice for Modified Salt Spray (Fog) Testing", "normType":"Standard Salt Mist Tests" } , { "id":"743", "name":"Bosch N42AP102", "description":"Bosch Norm Salt Spray Test NSS", "normType":"Standard Salt Mist Tests" } , { "id":"744", "name":"Bosch N42AP108 (12\/1984) 3.1 und 3.2", "description":"Klimapr\u00fcfungen - Kombinierte Salzpr\u00fchnebel-Feuchtepr\u00fcfung", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"745", "name":"Bosch N42AP108 (12\/1984) 3.3", "description":"Klimapr\u00fcfungen - Kombinierte Salzpr\u00fchnebel-Feuchtepr\u00fcfung", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"746", "name":"BS 2011 P. 2.1 Ka (1982)", "description":"Environmental testing. Tests. Test Ef. Impact, pendulum hammer", "normType":"Standard Salt Mist Tests" } , { "id":"762", "name":"DIN 50017 KK, KFW, KTW (1982) ", "description":"replaced by DIN EN ISO 6270-2", "normType":"Condensed Water Test" } , { "id":"764", "name":"DIN 50021; CASS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"765", "name":"DIN 50021; ESS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"766", "name":"DIN 50021; NSS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"773", "name":"DIN EN ISO 11997-1", "description":"Paints and varnishes\u00a0- Determination of resistance to cyclic corrosion conditions\u00a0- Part\u00a01: Wet (salt fog)\/dry\/humidity", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"774", "name":"DIN EN ISO 4623-2 (2004) Filiform", "description":"Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"775", "name":"DIN EN ISO 6270-2 (KFW) AHT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"776", "name":"DIN EN ISO 6270-2 (KK) CH (2005)", "description":"Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres ", "normType":"Condensed Water Test" } , { "id":"777", "name":"DIN EN ISO 6270-2 (KTW) AT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"794", "name":"FIAT 50180 A1;A2;A3;B1 ", "description":"Corrosion Tests", "normType":"Standard Salt Mist Tests" } , { "id":"796", "name":"Ford CETP :00.00-L-467 ", "description":"Laboratory Accelerated Cyclic Corrosion Test", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"803", "name":"GME 60202", "description":"Determintation of the resistance of automotive components to high humidity environments", "normType":"Condensed Water Test" } , { "id":"804", "name":"GME 60206 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by SALT SPRAY FOG TESTING", "normType":"Standard Salt Mist Tests" } , { "id":"805", "name":"GME 60207 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by Copper Accelerated Acetic Acid Salt Spray (CASS) ", "normType":"Standard Salt Mist Tests" } , { "id":"812", "name":"Honda 7664Z-S5A-000", "description":"Frosten: -20\u00b0C, Klima: 50\u00b0C\/95% r.F., Trocknen: +60\u00b0C, SS bei +35\u00b0C, 5% NaCl, Temperatur max 0,44 k\/min", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"813", "name":"Honda CCT 5100 Z-SGO-AOO (11\/88)", "description":"Frosten: -20\u00b0C, Klima: 50\u00b0C\/95% r.F., Trocknen: +60\u00b0C, SS bei +35\u00b0C, 5% NaCl, Temperatur max 0,44 k\/min", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"814", "name":"Hyundai\/Kia MS 600-66(CCT-C)", "description":"Hyundai and KIA Corrosion Cycling Test Standard, Frosten: -20\u00b0C, Klima: 50\u00b0C\/95% r.F., Trocknen: +70\u00b0C, Salzsole nach KS D 9502 JIS Z 2371, Temperatur max 0,75 k\/min", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"817", "name":"IEC 60068-2-11 Ka (2000)", "description":"Environmental testing - Part 2: Tests; test Ka: Salt mist ", "normType":"Standard Salt Mist Tests" } , { "id":"825", "name":"IEC 60068-2-52;Kb severity 1-6 (1996)", "description":"Environmental testing - Part 2: Tests, Test Kb: Salt mist, cyclic (sodium chloride solution)", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"834", "name":"ISO 14993 (2001)", "description":"Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, \"dry\" and \"wet\" conditions", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"844", "name":"ISO 9227; AASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"845", "name":"ISO 9227; CASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"846", "name":"ISO 9227; NSS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"857", "name":"JIS Z 2371 (2000)", "description":"Methods of salt spray testing ", "normType":"Standard Salt Mist Tests" } , { "id":"861", "name":"KWT DC \/ PA PP PWT 3101 ", "description":"Klimawechseltest DaimlerChrysler: Frosten: -15\u00b0C, Feuchte max 0,33%\/min, Temperatur max 0,64 k\/min, Trocknen: SS bei +35\u00b0C, 1 % Na Cl, ph neutral, 3,0 ml\/h", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"862", "name":"Meko", "description":"Frosten: -35\u00b0C, SS bei +35\u00b0C, 5% NaCl", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"872", "name":"MIL-STD-202 H, Method101 E ", "description":"Electronic and electrical component parts", "normType":"Standard Salt Mist Tests" } , { "id":"896", "name":"MIL-STD-810 G, Method 509.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standard Salt Mist Tests" } , { "id":"900", "name":"Nissan M 0007 CCT I, II, IV (1986)", "description":"Corrosion Tests", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"901", "name":"Nissan M 0158 CCT I; IV ", "description":"Methods of Compound Corrosion Test", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"904", "name":"Porsche PPV 4017 ", "description":"Oberfl\u00e4chenschutz \/ Korrosionspr\u00fcfung - Modifizierter Klimawechseltest, Frosten: -15\u00b0C, Feuchte max 0,33%\/min, Temperatur max 0,64 k\/min, Trocknen: SS bei +35\u00b0C, 1 % Na Cl, ph neutral, 3,0 ml\/h", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"909", "name":"Renault D171058", "description":"Natural Salt Spray Test", "normType":"Standard Salt Mist Tests" } , { "id":"911", "name":"SAE J2334 (2003)", "description":"Laboratory Cyclic Corrosion Test ", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"913", "name":"SEP 1850 ", "description":"Cyclic corrosion testing of materials and components in automotive construction, Frosten: -15\u00b0C , Feuchte max 0,33%\/min, Temperatur max 0,22 k\/min, Trocknen: SS bei +35\u00b0C, 1 % Na Cl, ph neutral, 3,0 ml\/h", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"917", "name":"Toyota TSH 1555G, Meth. C ", "description":"Test Method for Accelerated Corrosion under Complex Environment", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"919", "name":"VDA 233-102", "description":"Specification to provide an accelerated test procedure for the assessment of the corrosion behaviour of components and of the corrosion protection provided by coating systems, Frosten: -15\u00b0C, Feuchte max 0,33%\/min, Temperatur max 0,22 k\/min, Trocknen: SS bei +35\u00b0C, 1 % Na Cl, ph neutral, 3,0 ml\/h", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"920", "name":"VDA 621-415 ", "description":"Zyklische Korrosionspr\u00fcfung von automobilen Komponenten\/Bauteilen \/ Pr\u00fcfung der G\u00fcte von Korrosionschutzschichten mit einer belastungsorientierten Korrosionspr\u00fcfungsmethode", "normType":"Corrosion Alternating Tests " } , { "id":"921", "name":"VDA 621-415 B", "description":"Zyklische Korrosionspr\u00fcfung von automobilen Komponenten\/Bauteilen \/ Pr\u00fcfung der G\u00fcte von Korrosionschutzschichten mit einer belastungsorientierten Korrosionspr\u00fcfungsmethode, Frosten: -15\u00b0C, Feuchte max 0,33%\/min, Temperatur max 0,25 k\/min, Trocknen: SS bei +35\u00b0C, 1 % Na Cl, ph neutral, 3,0 ml\/h", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"922", "name":"VDA 621-421(03\/1985) ", "description":"Vehicle Paint in Condensed Water Climates", "normType":"Condensed Water Test" } , { "id":"926", "name":"Voest Alpine ", "description":"Frosten: -15\u00b0C, Feuchte max 0,33%\/min, Temperatur max 0,25 k\/min, Trocknen: SS bei +35\u00b0C, 1 % Na Cl, ph neutral", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"929", "name":"Volkswagen PV 1209", "description":"Kondensatoren, Wasser- und Ladeluftk\u00fchler aus Al-Legierungen\/Korrosionspr\u00fcfung (Klima-Korrosionswechsel-Test), Frosten: -40\u00b0C, Klima: 80\u00b0C\/80% r.F., SS bei +35\u00b0C, 5% NaCl, Temperatur max 1,0 k\/min", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"930", "name":"Volkswagen PV 1210 ", "description":"Vehicle Parts - Testing of Resistance to Environmental Cycle Test (+80\/-40) \u00b0C", "normType":"Automobil Standards" } , { "id":"932", "name":"Volkswagen PV 3.15.3(12\/2011)", "description":"Farben und Lacke \/ Pr\u00fcfung der Korrosionsbest\u00e4ndigkeit von KTL-Beschichtungen auf verzinkten Stahlblechen \/ Pr\u00fcfung der Korrosionsbest\u00e4ndigkeit von KTL-Beschichtungen auf verzinkten Stahlblechen", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"935", "name":"Volvo STD 1027, 14", "description":"Accelerated corrosion test", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"936", "name":"Volvo STD 1027,1375", "description":"Corrosion resistance \/ Accelerated atmospheric corrosion testing - Volvo Indoor Corrosion Test (VICT)", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"937", "name":"Volvo STD 423-0014", "description":"Accelerated corrosion test \/ Atmospheric corrosion", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"938", "name":"Volvo STD 5711, 102 (1995)", "description":"Corrosion Test in artificial atmospheres \u2013 salt spray tests", "normType":"Standard Salt Mist Tests" } , { "id":"939", "name":"Volvo VCS 1027, 1449 ", "description":"Accelerated corrosion test, version II \u2013 ACT II \/ Cyclic atmospheric corrosion test with salt load", "normType":"Corrosion Alternating Tests with controlled climate" } ] } , { "name":"S\/KWT 2,4'\/15-60 IU", "deviceName":"SC KWT", "category":"Corrosion", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/korrosions-wechseltestgeraet-saltevent-typ-sc-kwt", "randomNumber":"30", "norms": [ { "id":"730", "name":"ASTM B 117 (2011)", "description":"Standard Practice for Operating Salt Spray\u00a0(Fog) Apparatus", "normType":"Standard Salt Mist Tests" } , { "id":"731", "name":"ASTM B 368 (2014)", "description":"Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)", "normType":"Standard Salt Mist Tests" } , { "id":"732", "name":"ASTM G 85; A1 (2011)", "description":"Standard Practice for Modified Salt Spray (Fog) Testing", "normType":"Standard Salt Mist Tests" } , { "id":"743", "name":"Bosch N42AP102", "description":"Bosch Norm Salt Spray Test NSS", "normType":"Standard Salt Mist Tests" } , { "id":"744", "name":"Bosch N42AP108 (12\/1984) 3.1 und 3.2", "description":"Klimapr\u00fcfungen - Kombinierte Salzpr\u00fchnebel-Feuchtepr\u00fcfung", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"745", "name":"Bosch N42AP108 (12\/1984) 3.3", "description":"Klimapr\u00fcfungen - Kombinierte Salzpr\u00fchnebel-Feuchtepr\u00fcfung", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"746", "name":"BS 2011 P. 2.1 Ka (1982)", "description":"Environmental testing. Tests. Test Ef. Impact, pendulum hammer", "normType":"Standard Salt Mist Tests" } , { "id":"762", "name":"DIN 50017 KK, KFW, KTW (1982) ", "description":"replaced by DIN EN ISO 6270-2", "normType":"Condensed Water Test" } , { "id":"764", "name":"DIN 50021; CASS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"765", "name":"DIN 50021; ESS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"766", "name":"DIN 50021; NSS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"773", "name":"DIN EN ISO 11997-1", "description":"Paints and varnishes\u00a0- Determination of resistance to cyclic corrosion conditions\u00a0- Part\u00a01: Wet (salt fog)\/dry\/humidity", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"774", "name":"DIN EN ISO 4623-2 (2004) Filiform", "description":"Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"775", "name":"DIN EN ISO 6270-2 (KFW) AHT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"776", "name":"DIN EN ISO 6270-2 (KK) CH (2005)", "description":"Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres ", "normType":"Condensed Water Test" } , { "id":"777", "name":"DIN EN ISO 6270-2 (KTW) AT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"794", "name":"FIAT 50180 A1;A2;A3;B1 ", "description":"Corrosion Tests", "normType":"Standard Salt Mist Tests" } , { "id":"803", "name":"GME 60202", "description":"Determintation of the resistance of automotive components to high humidity environments", "normType":"Condensed Water Test" } , { "id":"804", "name":"GME 60206 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by SALT SPRAY FOG TESTING", "normType":"Standard Salt Mist Tests" } , { "id":"805", "name":"GME 60207 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by Copper Accelerated Acetic Acid Salt Spray (CASS) ", "normType":"Standard Salt Mist Tests" } , { "id":"812", "name":"Honda 7664Z-S5A-000", "description":"Frosten: -20\u00b0C, Klima: 50\u00b0C\/95% r.F., Trocknen: +60\u00b0C, SS bei +35\u00b0C, 5% NaCl, Temperatur max 0,44 k\/min", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"813", "name":"Honda CCT 5100 Z-SGO-AOO (11\/88)", "description":"Frosten: -20\u00b0C, Klima: 50\u00b0C\/95% r.F., Trocknen: +60\u00b0C, SS bei +35\u00b0C, 5% NaCl, Temperatur max 0,44 k\/min", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"814", "name":"Hyundai\/Kia MS 600-66(CCT-C)", "description":"Hyundai and KIA Corrosion Cycling Test Standard, Frosten: -20\u00b0C, Klima: 50\u00b0C\/95% r.F., Trocknen: +70\u00b0C, Salzsole nach KS D 9502 JIS Z 2371, Temperatur max 0,75 k\/min", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"817", "name":"IEC 60068-2-11 Ka (2000)", "description":"Environmental testing - Part 2: Tests; test Ka: Salt mist ", "normType":"Standard Salt Mist Tests" } , { "id":"825", "name":"IEC 60068-2-52;Kb severity 1-6 (1996)", "description":"Environmental testing - Part 2: Tests, Test Kb: Salt mist, cyclic (sodium chloride solution)", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"834", "name":"ISO 14993 (2001)", "description":"Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, \"dry\" and \"wet\" conditions", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"844", "name":"ISO 9227; AASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"845", "name":"ISO 9227; CASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"846", "name":"ISO 9227; NSS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"857", "name":"JIS Z 2371 (2000)", "description":"Methods of salt spray testing ", "normType":"Standard Salt Mist Tests" } , { "id":"861", "name":"KWT DC \/ PA PP PWT 3101 ", "description":"Klimawechseltest DaimlerChrysler: Frosten: -15\u00b0C, Feuchte max 0,33%\/min, Temperatur max 0,64 k\/min, Trocknen: SS bei +35\u00b0C, 1 % Na Cl, ph neutral, 3,0 ml\/h", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"862", "name":"Meko", "description":"Frosten: -35\u00b0C, SS bei +35\u00b0C, 5% NaCl", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"872", "name":"MIL-STD-202 H, Method101 E ", "description":"Electronic and electrical component parts", "normType":"Standard Salt Mist Tests" } , { "id":"896", "name":"MIL-STD-810 G, Method 509.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standard Salt Mist Tests" } , { "id":"900", "name":"Nissan M 0007 CCT I, II, IV (1986)", "description":"Corrosion Tests", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"901", "name":"Nissan M 0158 CCT I; IV ", "description":"Methods of Compound Corrosion Test", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"904", "name":"Porsche PPV 4017 ", "description":"Oberfl\u00e4chenschutz \/ Korrosionspr\u00fcfung - Modifizierter Klimawechseltest, Frosten: -15\u00b0C, Feuchte max 0,33%\/min, Temperatur max 0,64 k\/min, Trocknen: SS bei +35\u00b0C, 1 % Na Cl, ph neutral, 3,0 ml\/h", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"909", "name":"Renault D171058", "description":"Natural Salt Spray Test", "normType":"Standard Salt Mist Tests" } , { "id":"911", "name":"SAE J2334 (2003)", "description":"Laboratory Cyclic Corrosion Test ", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"913", "name":"SEP 1850 ", "description":"Cyclic corrosion testing of materials and components in automotive construction, Frosten: -15\u00b0C , Feuchte max 0,33%\/min, Temperatur max 0,22 k\/min, Trocknen: SS bei +35\u00b0C, 1 % Na Cl, ph neutral, 3,0 ml\/h", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"917", "name":"Toyota TSH 1555G, Meth. C ", "description":"Test Method for Accelerated Corrosion under Complex Environment", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"919", "name":"VDA 233-102", "description":"Specification to provide an accelerated test procedure for the assessment of the corrosion behaviour of components and of the corrosion protection provided by coating systems, Frosten: -15\u00b0C, Feuchte max 0,33%\/min, Temperatur max 0,22 k\/min, Trocknen: SS bei +35\u00b0C, 1 % Na Cl, ph neutral, 3,0 ml\/h", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"920", "name":"VDA 621-415 ", "description":"Zyklische Korrosionspr\u00fcfung von automobilen Komponenten\/Bauteilen \/ Pr\u00fcfung der G\u00fcte von Korrosionschutzschichten mit einer belastungsorientierten Korrosionspr\u00fcfungsmethode", "normType":"Corrosion Alternating Tests " } , { "id":"921", "name":"VDA 621-415 B", "description":"Zyklische Korrosionspr\u00fcfung von automobilen Komponenten\/Bauteilen \/ Pr\u00fcfung der G\u00fcte von Korrosionschutzschichten mit einer belastungsorientierten Korrosionspr\u00fcfungsmethode, Frosten: -15\u00b0C, Feuchte max 0,33%\/min, Temperatur max 0,25 k\/min, Trocknen: SS bei +35\u00b0C, 1 % Na Cl, ph neutral, 3,0 ml\/h", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"922", "name":"VDA 621-421(03\/1985) ", "description":"Vehicle Paint in Condensed Water Climates", "normType":"Condensed Water Test" } , { "id":"926", "name":"Voest Alpine ", "description":"Frosten: -15\u00b0C, Feuchte max 0,33%\/min, Temperatur max 0,25 k\/min, Trocknen: SS bei +35\u00b0C, 1 % Na Cl, ph neutral", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"929", "name":"Volkswagen PV 1209", "description":"Kondensatoren, Wasser- und Ladeluftk\u00fchler aus Al-Legierungen\/Korrosionspr\u00fcfung (Klima-Korrosionswechsel-Test), Frosten: -40\u00b0C, Klima: 80\u00b0C\/80% r.F., SS bei +35\u00b0C, 5% NaCl, Temperatur max 1,0 k\/min", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"930", "name":"Volkswagen PV 1210 ", "description":"Vehicle Parts - Testing of Resistance to Environmental Cycle Test (+80\/-40) \u00b0C", "normType":"Automobil Standards" } , { "id":"932", "name":"Volkswagen PV 3.15.3(12\/2011)", "description":"Farben und Lacke \/ Pr\u00fcfung der Korrosionsbest\u00e4ndigkeit von KTL-Beschichtungen auf verzinkten Stahlblechen \/ Pr\u00fcfung der Korrosionsbest\u00e4ndigkeit von KTL-Beschichtungen auf verzinkten Stahlblechen", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"938", "name":"Volvo STD 5711, 102 (1995)", "description":"Corrosion Test in artificial atmospheres \u2013 salt spray tests", "normType":"Standard Salt Mist Tests" } ] } , { "name":"S\/KWT 4,3'\/15-60 IU", "deviceName":"SC KWT", "category":"Corrosion", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/korrosions-wechseltestgeraet-saltevent-typ-sc-kwt", "randomNumber":"10", "norms": [ { "id":"730", "name":"ASTM B 117 (2011)", "description":"Standard Practice for Operating Salt Spray\u00a0(Fog) Apparatus", "normType":"Standard Salt Mist Tests" } , { "id":"731", "name":"ASTM B 368 (2014)", "description":"Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)", "normType":"Standard Salt Mist Tests" } , { "id":"732", "name":"ASTM G 85; A1 (2011)", "description":"Standard Practice for Modified Salt Spray (Fog) Testing", "normType":"Standard Salt Mist Tests" } , { "id":"743", "name":"Bosch N42AP102", "description":"Bosch Norm Salt Spray Test NSS", "normType":"Standard Salt Mist Tests" } , { "id":"744", "name":"Bosch N42AP108 (12\/1984) 3.1 und 3.2", "description":"Klimapr\u00fcfungen - Kombinierte Salzpr\u00fchnebel-Feuchtepr\u00fcfung", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"745", "name":"Bosch N42AP108 (12\/1984) 3.3", "description":"Klimapr\u00fcfungen - Kombinierte Salzpr\u00fchnebel-Feuchtepr\u00fcfung", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"746", "name":"BS 2011 P. 2.1 Ka (1982)", "description":"Environmental testing. Tests. Test Ef. Impact, pendulum hammer", "normType":"Standard Salt Mist Tests" } , { "id":"762", "name":"DIN 50017 KK, KFW, KTW (1982) ", "description":"replaced by DIN EN ISO 6270-2", "normType":"Condensed Water Test" } , { "id":"764", "name":"DIN 50021; CASS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"765", "name":"DIN 50021; ESS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"766", "name":"DIN 50021; NSS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"773", "name":"DIN EN ISO 11997-1", "description":"Paints and varnishes\u00a0- Determination of resistance to cyclic corrosion conditions\u00a0- Part\u00a01: Wet (salt fog)\/dry\/humidity", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"774", "name":"DIN EN ISO 4623-2 (2004) Filiform", "description":"Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"775", "name":"DIN EN ISO 6270-2 (KFW) AHT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"776", "name":"DIN EN ISO 6270-2 (KK) CH (2005)", "description":"Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres ", "normType":"Condensed Water Test" } , { "id":"777", "name":"DIN EN ISO 6270-2 (KTW) AT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"794", "name":"FIAT 50180 A1;A2;A3;B1 ", "description":"Corrosion Tests", "normType":"Standard Salt Mist Tests" } , { "id":"803", "name":"GME 60202", "description":"Determintation of the resistance of automotive components to high humidity environments", "normType":"Condensed Water Test" } , { "id":"804", "name":"GME 60206 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by SALT SPRAY FOG TESTING", "normType":"Standard Salt Mist Tests" } , { "id":"805", "name":"GME 60207 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by Copper Accelerated Acetic Acid Salt Spray (CASS) ", "normType":"Standard Salt Mist Tests" } , { "id":"812", "name":"Honda 7664Z-S5A-000", "description":"Frosten: -20\u00b0C, Klima: 50\u00b0C\/95% r.F., Trocknen: +60\u00b0C, SS bei +35\u00b0C, 5% NaCl, Temperatur max 0,44 k\/min", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"813", "name":"Honda CCT 5100 Z-SGO-AOO (11\/88)", "description":"Frosten: -20\u00b0C, Klima: 50\u00b0C\/95% r.F., Trocknen: +60\u00b0C, SS bei +35\u00b0C, 5% NaCl, Temperatur max 0,44 k\/min", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"814", "name":"Hyundai\/Kia MS 600-66(CCT-C)", "description":"Hyundai and KIA Corrosion Cycling Test Standard, Frosten: -20\u00b0C, Klima: 50\u00b0C\/95% r.F., Trocknen: +70\u00b0C, Salzsole nach KS D 9502 JIS Z 2371, Temperatur max 0,75 k\/min", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"817", "name":"IEC 60068-2-11 Ka (2000)", "description":"Environmental testing - Part 2: Tests; test Ka: Salt mist ", "normType":"Standard Salt Mist Tests" } , { "id":"825", "name":"IEC 60068-2-52;Kb severity 1-6 (1996)", "description":"Environmental testing - Part 2: Tests, Test Kb: Salt mist, cyclic (sodium chloride solution)", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"834", "name":"ISO 14993 (2001)", "description":"Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, \"dry\" and \"wet\" conditions", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"844", "name":"ISO 9227; AASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"845", "name":"ISO 9227; CASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"846", "name":"ISO 9227; NSS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"857", "name":"JIS Z 2371 (2000)", "description":"Methods of salt spray testing ", "normType":"Standard Salt Mist Tests" } , { "id":"861", "name":"KWT DC \/ PA PP PWT 3101 ", "description":"Klimawechseltest DaimlerChrysler: Frosten: -15\u00b0C, Feuchte max 0,33%\/min, Temperatur max 0,64 k\/min, Trocknen: SS bei +35\u00b0C, 1 % Na Cl, ph neutral, 3,0 ml\/h", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"862", "name":"Meko", "description":"Frosten: -35\u00b0C, SS bei +35\u00b0C, 5% NaCl", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"872", "name":"MIL-STD-202 H, Method101 E ", "description":"Electronic and electrical component parts", "normType":"Standard Salt Mist Tests" } , { "id":"896", "name":"MIL-STD-810 G, Method 509.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standard Salt Mist Tests" } , { "id":"900", "name":"Nissan M 0007 CCT I, II, IV (1986)", "description":"Corrosion Tests", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"901", "name":"Nissan M 0158 CCT I; IV ", "description":"Methods of Compound Corrosion Test", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"904", "name":"Porsche PPV 4017 ", "description":"Oberfl\u00e4chenschutz \/ Korrosionspr\u00fcfung - Modifizierter Klimawechseltest, Frosten: -15\u00b0C, Feuchte max 0,33%\/min, Temperatur max 0,64 k\/min, Trocknen: SS bei +35\u00b0C, 1 % Na Cl, ph neutral, 3,0 ml\/h", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"909", "name":"Renault D171058", "description":"Natural Salt Spray Test", "normType":"Standard Salt Mist Tests" } , { "id":"911", "name":"SAE J2334 (2003)", "description":"Laboratory Cyclic Corrosion Test ", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"913", "name":"SEP 1850 ", "description":"Cyclic corrosion testing of materials and components in automotive construction, Frosten: -15\u00b0C , Feuchte max 0,33%\/min, Temperatur max 0,22 k\/min, Trocknen: SS bei +35\u00b0C, 1 % Na Cl, ph neutral, 3,0 ml\/h", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"919", "name":"VDA 233-102", "description":"Specification to provide an accelerated test procedure for the assessment of the corrosion behaviour of components and of the corrosion protection provided by coating systems, Frosten: -15\u00b0C, Feuchte max 0,33%\/min, Temperatur max 0,22 k\/min, Trocknen: SS bei +35\u00b0C, 1 % Na Cl, ph neutral, 3,0 ml\/h", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"920", "name":"VDA 621-415 ", "description":"Zyklische Korrosionspr\u00fcfung von automobilen Komponenten\/Bauteilen \/ Pr\u00fcfung der G\u00fcte von Korrosionschutzschichten mit einer belastungsorientierten Korrosionspr\u00fcfungsmethode", "normType":"Corrosion Alternating Tests " } , { "id":"921", "name":"VDA 621-415 B", "description":"Zyklische Korrosionspr\u00fcfung von automobilen Komponenten\/Bauteilen \/ Pr\u00fcfung der G\u00fcte von Korrosionschutzschichten mit einer belastungsorientierten Korrosionspr\u00fcfungsmethode, Frosten: -15\u00b0C, Feuchte max 0,33%\/min, Temperatur max 0,25 k\/min, Trocknen: SS bei +35\u00b0C, 1 % Na Cl, ph neutral, 3,0 ml\/h", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"922", "name":"VDA 621-421(03\/1985) ", "description":"Vehicle Paint in Condensed Water Climates", "normType":"Condensed Water Test" } , { "id":"926", "name":"Voest Alpine ", "description":"Frosten: -15\u00b0C, Feuchte max 0,33%\/min, Temperatur max 0,25 k\/min, Trocknen: SS bei +35\u00b0C, 1 % Na Cl, ph neutral", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"929", "name":"Volkswagen PV 1209", "description":"Kondensatoren, Wasser- und Ladeluftk\u00fchler aus Al-Legierungen\/Korrosionspr\u00fcfung (Klima-Korrosionswechsel-Test), Frosten: -40\u00b0C, Klima: 80\u00b0C\/80% r.F., SS bei +35\u00b0C, 5% NaCl, Temperatur max 1,0 k\/min", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"930", "name":"Volkswagen PV 1210 ", "description":"Vehicle Parts - Testing of Resistance to Environmental Cycle Test (+80\/-40) \u00b0C", "normType":"Automobil Standards" } , { "id":"932", "name":"Volkswagen PV 3.15.3(12\/2011)", "description":"Farben und Lacke \/ Pr\u00fcfung der Korrosionsbest\u00e4ndigkeit von KTL-Beschichtungen auf verzinkten Stahlblechen \/ Pr\u00fcfung der Korrosionsbest\u00e4ndigkeit von KTL-Beschichtungen auf verzinkten Stahlblechen", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"938", "name":"Volvo STD 5711, 102 (1995)", "description":"Corrosion Test in artificial atmospheres \u2013 salt spray tests", "normType":"Standard Salt Mist Tests" } ] } , { "name":"SSC 2000", "deviceName":"SC", "category":"Corrosion", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/korrosions-testgeraet-saltevent-typ-sc", "randomNumber":"24", "norms": [ { "id":"730", "name":"ASTM B 117 (2011)", "description":"Standard Practice for Operating Salt Spray\u00a0(Fog) Apparatus", "normType":"Standard Salt Mist Tests" } , { "id":"731", "name":"ASTM B 368 (2014)", "description":"Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)", "normType":"Standard Salt Mist Tests" } , { "id":"732", "name":"ASTM G 85; A1 (2011)", "description":"Standard Practice for Modified Salt Spray (Fog) Testing", "normType":"Standard Salt Mist Tests" } , { "id":"735", "name":"ASTM G 85; A4 (2011)", "description":"Standard Practice for Modified Salt Spray\u00a0(Fog) Testing", "normType":"Standard Salt Mist Tests" } , { "id":"743", "name":"Bosch N42AP102", "description":"Bosch Norm Salt Spray Test NSS", "normType":"Standard Salt Mist Tests" } , { "id":"746", "name":"BS 2011 P. 2.1 Ka (1982)", "description":"Environmental testing. Tests. Test Ef. Impact, pendulum hammer", "normType":"Standard Salt Mist Tests" } , { "id":"762", "name":"DIN 50017 KK, KFW, KTW (1982) ", "description":"replaced by DIN EN ISO 6270-2", "normType":"Condensed Water Test" } , { "id":"764", "name":"DIN 50021; CASS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"765", "name":"DIN 50021; ESS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"766", "name":"DIN 50021; NSS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"775", "name":"DIN EN ISO 6270-2 (KFW) AHT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"776", "name":"DIN EN ISO 6270-2 (KK) CH (2005)", "description":"Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres ", "normType":"Condensed Water Test" } , { "id":"777", "name":"DIN EN ISO 6270-2 (KTW) AT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"794", "name":"FIAT 50180 A1;A2;A3;B1 ", "description":"Corrosion Tests", "normType":"Standard Salt Mist Tests" } , { "id":"803", "name":"GME 60202", "description":"Determintation of the resistance of automotive components to high humidity environments", "normType":"Condensed Water Test" } , { "id":"804", "name":"GME 60206 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by SALT SPRAY FOG TESTING", "normType":"Standard Salt Mist Tests" } , { "id":"805", "name":"GME 60207 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by Copper Accelerated Acetic Acid Salt Spray (CASS) ", "normType":"Standard Salt Mist Tests" } , { "id":"817", "name":"IEC 60068-2-11 Ka (2000)", "description":"Environmental testing - Part 2: Tests; test Ka: Salt mist ", "normType":"Standard Salt Mist Tests" } , { "id":"844", "name":"ISO 9227; AASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"845", "name":"ISO 9227; CASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"846", "name":"ISO 9227; NSS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"857", "name":"JIS Z 2371 (2000)", "description":"Methods of salt spray testing ", "normType":"Standard Salt Mist Tests" } , { "id":"872", "name":"MIL-STD-202 H, Method101 E ", "description":"Electronic and electrical component parts", "normType":"Standard Salt Mist Tests" } , { "id":"896", "name":"MIL-STD-810 G, Method 509.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standard Salt Mist Tests" } , { "id":"909", "name":"Renault D171058", "description":"Natural Salt Spray Test", "normType":"Standard Salt Mist Tests" } , { "id":"922", "name":"VDA 621-421(03\/1985) ", "description":"Vehicle Paint in Condensed Water Climates", "normType":"Condensed Water Test" } , { "id":"938", "name":"Volvo STD 5711, 102 (1995)", "description":"Corrosion Test in artificial atmospheres \u2013 salt spray tests", "normType":"Standard Salt Mist Tests" } ] } , { "name":"SSC\/KWT 2000", "deviceName":"SC KWT", "category":"Corrosion", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/korrosions-wechseltestgeraet-saltevent-typ-sc-kwt", "randomNumber":"10", "norms": [ { "id":"730", "name":"ASTM B 117 (2011)", "description":"Standard Practice for Operating Salt Spray\u00a0(Fog) Apparatus", "normType":"Standard Salt Mist Tests" } , { "id":"731", "name":"ASTM B 368 (2014)", "description":"Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)", "normType":"Standard Salt Mist Tests" } , { "id":"732", "name":"ASTM G 85; A1 (2011)", "description":"Standard Practice for Modified Salt Spray (Fog) Testing", "normType":"Standard Salt Mist Tests" } , { "id":"735", "name":"ASTM G 85; A4 (2011)", "description":"Standard Practice for Modified Salt Spray\u00a0(Fog) Testing", "normType":"Standard Salt Mist Tests" } , { "id":"743", "name":"Bosch N42AP102", "description":"Bosch Norm Salt Spray Test NSS", "normType":"Standard Salt Mist Tests" } , { "id":"746", "name":"BS 2011 P. 2.1 Ka (1982)", "description":"Environmental testing. Tests. Test Ef. Impact, pendulum hammer", "normType":"Standard Salt Mist Tests" } , { "id":"762", "name":"DIN 50017 KK, KFW, KTW (1982) ", "description":"replaced by DIN EN ISO 6270-2", "normType":"Condensed Water Test" } , { "id":"764", "name":"DIN 50021; CASS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"765", "name":"DIN 50021; ESS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"766", "name":"DIN 50021; NSS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"775", "name":"DIN EN ISO 6270-2 (KFW) AHT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"776", "name":"DIN EN ISO 6270-2 (KK) CH (2005)", "description":"Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres ", "normType":"Condensed Water Test" } , { "id":"777", "name":"DIN EN ISO 6270-2 (KTW) AT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"794", "name":"FIAT 50180 A1;A2;A3;B1 ", "description":"Corrosion Tests", "normType":"Standard Salt Mist Tests" } , { "id":"803", "name":"GME 60202", "description":"Determintation of the resistance of automotive components to high humidity environments", "normType":"Condensed Water Test" } , { "id":"804", "name":"GME 60206 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by SALT SPRAY FOG TESTING", "normType":"Standard Salt Mist Tests" } , { "id":"805", "name":"GME 60207 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by Copper Accelerated Acetic Acid Salt Spray (CASS) ", "normType":"Standard Salt Mist Tests" } , { "id":"817", "name":"IEC 60068-2-11 Ka (2000)", "description":"Environmental testing - Part 2: Tests; test Ka: Salt mist ", "normType":"Standard Salt Mist Tests" } , { "id":"844", "name":"ISO 9227; AASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"845", "name":"ISO 9227; CASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"846", "name":"ISO 9227; NSS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"857", "name":"JIS Z 2371 (2000)", "description":"Methods of salt spray testing ", "normType":"Standard Salt Mist Tests" } , { "id":"872", "name":"MIL-STD-202 H, Method101 E ", "description":"Electronic and electrical component parts", "normType":"Standard Salt Mist Tests" } , { "id":"896", "name":"MIL-STD-810 G, Method 509.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standard Salt Mist Tests" } , { "id":"909", "name":"Renault D171058", "description":"Natural Salt Spray Test", "normType":"Standard Salt Mist Tests" } , { "id":"920", "name":"VDA 621-415 ", "description":"Zyklische Korrosionspr\u00fcfung von automobilen Komponenten\/Bauteilen \/ Pr\u00fcfung der G\u00fcte von Korrosionschutzschichten mit einer belastungsorientierten Korrosionspr\u00fcfungsmethode", "normType":"Corrosion Alternating Tests " } , { "id":"922", "name":"VDA 621-421(03\/1985) ", "description":"Vehicle Paint in Condensed Water Climates", "normType":"Condensed Water Test" } , { "id":"938", "name":"Volvo STD 5711, 102 (1995)", "description":"Corrosion Test in artificial atmospheres \u2013 salt spray tests", "normType":"Standard Salt Mist Tests" } ] } , { "name":"SSC\/KKWT 2000", "deviceName":"SC UKWT", "category":"Corrosion", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/umluft-korrosions-wechseltestgeraet-saltevent-typ-scukwt", "randomNumber":"32", "norms": [ { "id":"730", "name":"ASTM B 117 (2011)", "description":"Standard Practice for Operating Salt Spray\u00a0(Fog) Apparatus", "normType":"Standard Salt Mist Tests" } , { "id":"731", "name":"ASTM B 368 (2014)", "description":"Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)", "normType":"Standard Salt Mist Tests" } , { "id":"732", "name":"ASTM G 85; A1 (2011)", "description":"Standard Practice for Modified Salt Spray (Fog) Testing", "normType":"Standard Salt Mist Tests" } , { "id":"733", "name":"ASTM G 85; A2 (2011)", "description":"Standard Practice for Modified Salt Spray\u00a0(Fog) Testing", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"734", "name":"ASTM G 85; A3 (2011) SWAAT", "description":"Standard Practice for Modified Salt Spray\u00a0(Fog) Testing", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"736", "name":"ASTM G 85; A5 (2011) ", "description":"Standard Practice for Modified Salt Spray\u00a0(Fog) Testing", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"743", "name":"Bosch N42AP102", "description":"Bosch Norm Salt Spray Test NSS", "normType":"Standard Salt Mist Tests" } , { "id":"744", "name":"Bosch N42AP108 (12\/1984) 3.1 und 3.2", "description":"Klimapr\u00fcfungen - Kombinierte Salzpr\u00fchnebel-Feuchtepr\u00fcfung", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"745", "name":"Bosch N42AP108 (12\/1984) 3.3", "description":"Klimapr\u00fcfungen - Kombinierte Salzpr\u00fchnebel-Feuchtepr\u00fcfung", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"746", "name":"BS 2011 P. 2.1 Ka (1982)", "description":"Environmental testing. Tests. Test Ef. Impact, pendulum hammer", "normType":"Standard Salt Mist Tests" } , { "id":"762", "name":"DIN 50017 KK, KFW, KTW (1982) ", "description":"replaced by DIN EN ISO 6270-2", "normType":"Condensed Water Test" } , { "id":"764", "name":"DIN 50021; CASS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"765", "name":"DIN 50021; ESS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"766", "name":"DIN 50021; NSS (1998) \/ DIN EN ISO 9227 (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"773", "name":"DIN EN ISO 11997-1", "description":"Paints and varnishes\u00a0- Determination of resistance to cyclic corrosion conditions\u00a0- Part\u00a01: Wet (salt fog)\/dry\/humidity", "normType":"Corrosion Alternating Tests with controlled climate and freeze" } , { "id":"775", "name":"DIN EN ISO 6270-2 (KFW) AHT (2005)", "description":"condensation atmosphere with alternating humidity & air temperature", "normType":"Condensed Water Test" } , { "id":"776", "name":"DIN EN ISO 6270-2 (KK) CH (2005)", "description":"Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres ", "normType":"Condensed Water Test" } , { "id":"794", "name":"FIAT 50180 A1;A2;A3;B1 ", "description":"Corrosion Tests", "normType":"Standard Salt Mist Tests" } , { "id":"796", "name":"Ford CETP :00.00-L-467 ", "description":"Laboratory Accelerated Cyclic Corrosion Test", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"803", "name":"GME 60202", "description":"Determintation of the resistance of automotive components to high humidity environments", "normType":"Condensed Water Test" } , { "id":"804", "name":"GME 60206 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by SALT SPRAY FOG TESTING", "normType":"Standard Salt Mist Tests" } , { "id":"805", "name":"GME 60207 (without dosing pump)", "description":"Determination of Resistance to Corrosion of Automotive Components by Copper Accelerated Acetic Acid Salt Spray (CASS) ", "normType":"Standard Salt Mist Tests" } , { "id":"817", "name":"IEC 60068-2-11 Ka (2000)", "description":"Environmental testing - Part 2: Tests; test Ka: Salt mist ", "normType":"Standard Salt Mist Tests" } , { "id":"825", "name":"IEC 60068-2-52;Kb severity 1-6 (1996)", "description":"Environmental testing - Part 2: Tests, Test Kb: Salt mist, cyclic (sodium chloride solution)", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"834", "name":"ISO 14993 (2001)", "description":"Corrosion of metals and alloys - Accelerated testing involving cyclic exposure to salt mist, \"dry\" and \"wet\" conditions", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"844", "name":"ISO 9227; AASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"845", "name":"ISO 9227; CASS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"846", "name":"ISO 9227; NSS (2012)", "description":"Corrosion tests in artificial atmospheres - Salt spray tests ", "normType":"Standard Salt Mist Tests" } , { "id":"857", "name":"JIS Z 2371 (2000)", "description":"Methods of salt spray testing ", "normType":"Standard Salt Mist Tests" } , { "id":"872", "name":"MIL-STD-202 H, Method101 E ", "description":"Electronic and electrical component parts", "normType":"Standard Salt Mist Tests" } , { "id":"896", "name":"MIL-STD-810 G, Method 509.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standard Salt Mist Tests" } , { "id":"900", "name":"Nissan M 0007 CCT I, II, IV (1986)", "description":"Corrosion Tests", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"901", "name":"Nissan M 0158 CCT I; IV ", "description":"Methods of Compound Corrosion Test", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"909", "name":"Renault D171058", "description":"Natural Salt Spray Test", "normType":"Standard Salt Mist Tests" } , { "id":"911", "name":"SAE J2334 (2003)", "description":"Laboratory Cyclic Corrosion Test ", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"917", "name":"Toyota TSH 1555G, Meth. C ", "description":"Test Method for Accelerated Corrosion under Complex Environment", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"920", "name":"VDA 621-415 ", "description":"Zyklische Korrosionspr\u00fcfung von automobilen Komponenten\/Bauteilen \/ Pr\u00fcfung der G\u00fcte von Korrosionschutzschichten mit einer belastungsorientierten Korrosionspr\u00fcfungsmethode", "normType":"Corrosion Alternating Tests " } , { "id":"922", "name":"VDA 621-421(03\/1985) ", "description":"Vehicle Paint in Condensed Water Climates", "normType":"Condensed Water Test" } , { "id":"930", "name":"Volkswagen PV 1210 ", "description":"Vehicle Parts - Testing of Resistance to Environmental Cycle Test (+80\/-40) \u00b0C", "normType":"Automobil Standards" } , { "id":"932", "name":"Volkswagen PV 3.15.3(12\/2011)", "description":"Farben und Lacke \/ Pr\u00fcfung der Korrosionsbest\u00e4ndigkeit von KTL-Beschichtungen auf verzinkten Stahlblechen \/ Pr\u00fcfung der Korrosionsbest\u00e4ndigkeit von KTL-Beschichtungen auf verzinkten Stahlblechen", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"935", "name":"Volvo STD 1027, 14", "description":"Accelerated corrosion test", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"936", "name":"Volvo STD 1027,1375", "description":"Corrosion resistance \/ Accelerated atmospheric corrosion testing - Volvo Indoor Corrosion Test (VICT)", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"937", "name":"Volvo STD 423-0014", "description":"Accelerated corrosion test \/ Atmospheric corrosion", "normType":"Corrosion Alternating Tests with controlled climate" } , { "id":"938", "name":"Volvo STD 5711, 102 (1995)", "description":"Corrosion Test in artificial atmospheres \u2013 salt spray tests", "normType":"Standard Salt Mist Tests" } , { "id":"939", "name":"Volvo VCS 1027, 1449 ", "description":"Accelerated corrosion test, version II \u2013 ACT II \/ Cyclic atmospheric corrosion test with salt load", "normType":"Corrosion Alternating Tests with controlled climate" } ] } , { "name":"SWT IPX1\/IPX2", "deviceName":"SprayEvent", "category":"Dust & Water", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/spritz-und-spruehwassertestgeraet-typ-swt", "randomNumber":"23", "norms": [ { "id":"737", "name":"BMW GS 95 003-4", "description":"Electrical\/Electronic Assemblies in Motor Vehicles \/ Climatic Requirements", "normType":"Automobil Standards" } , { "id":"742", "name":"BMW QV 63025 08_03", "description":"Abblend- \/ Fernlicht \u2013 Scheinwerfer f\u00fcr Halogen- und Xenon-Systeme", "normType":"Automobil Standards" } , { "id":"747", "name":"BS 5490", "description":"Specification for classification of degrees of protection provided by enclosures", "normType":"International Testing Standards" } , { "id":"748", "name":"CAM-EG-13", "description":"Rain", "normType":"Automobil Standards" } , { "id":"749", "name":"CEI IEC 529", "description":"Degrees of protection provided by enclosures (IP-Code)", "normType":"International Testing Standards" } , { "id":"750", "name":"Chrysler TP 3200A", "description":"Water Sealing Test", "normType":"Automobil Standards" } , { "id":"751", "name":"CSN 03 8827", "description":"Widerstandsf\u00e4higkeitspr\u00fcfungen", "normType":"International Testing Standards" } , { "id":"754", "name":"DIN 40050 T1", "description":"IP-Schutzarten, Ber\u00fchrungs- Fremdk\u00f6rper- und Wasserschutz f\u00fcr elektrische Betriebsmittel", "normType":"International Testing Standards" } , { "id":"755", "name":"DIN 40050 T9", "description":"IP-Schutzarten, Schutz gegen Fremdk\u00f6rper, Wasser und Ber\u00fchren - Elektrische Ausr\u00fcstung", "normType":"International Testing Standards" } , { "id":"756", "name":"DIN 40052", "description":"Degrees of protection provided by enclosures; test to check protection against ingress of solid foreign bodies, dust chamber", "normType":"International Testing Standards" } , { "id":"757", "name":"DIN 40053 T1", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Tropfger\u00e4t", "normType":"International Testing Standards" } , { "id":"758", "name":"DIN 40053 T2", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Schwenkrohr", "normType":"International Testing Standards" } , { "id":"759", "name":"DIN 40053 T3", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Spritzbrause", "normType":"International Testing Standards" } , { "id":"760", "name":"DIN 40053 T4", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Strahld\u00fcse", "normType":"International Testing Standards" } , { "id":"761", "name":"DIN 40053 T5", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Tropfwasserbrause", "normType":"International Testing Standards" } , { "id":"767", "name":"DIN 58390 T7", "description":"Umweltpr\u00fcfung von optischen Ger\u00e4ten - Regen", "normType":"International Testing Standards" } , { "id":"769", "name":"DIN EN 60034-18-1", "description":"Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines ", "normType":"International Testing Standards" } , { "id":"770", "name":"DIN EN 60034-18-21", "description":"Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification", "normType":"International Testing Standards" } , { "id":"771", "name":"DIN EN 60034-5", "description":"Rotating electrical machines - Part 5: Degrees of protection provided by integral design of rotating electrical machines (IP code) - Classification ", "normType":"International Testing Standards" } , { "id":"772", "name":"DIN EN 60529", "description":"Specification for degrees of protection provided by enclosures (IP code)", "normType":"International Testing Standards" } , { "id":"780", "name":"DIN IEC 34 T5", "description":"Umlaufende elektrische Maschinen - IP-Schutzarten; Einteilung der Schutzarten durch Geh\u00e4use f\u00fcr umlaufende Maschinen", "normType":"International Testing Standards" } , { "id":"782", "name":"DIN IEC 60068-1", "description":"Grundlegende Umweltpr\u00fcfverfahren - Teil 1: Allgemeines", "normType":"International Testing Standards" } , { "id":"783", "name":"DIN ISO 9022-7", "description":"Optics and photonics - Environmental test methods - Part 7: Resistance to drip or rain ", "normType":"International Testing Standards" } , { "id":"784", "name":"ECE R6", "description":"Best\u00e4ndigkeit gegen\u00fcber \u00e4u\u00dferen Einfl\u00fcssen", "normType":"International Testing Standards" } , { "id":"795", "name":"FMVSS108", "description":"Lamp, Reflective Devices and Associated Equipment", "normType":"International Testing Standards" } , { "id":"800", "name":"General Motors GME 12505-1", "description":"General Specification Exterior - Lamps and Headlamps", "normType":"Automobil Standards" } , { "id":"801", "name":"General Motors GMW 14639", "description":"Lamps and Headlamps", "normType":"Automobil Standards" } , { "id":"802", "name":"General Motors GMW 14906", "description":"General Specification Exterior - Lamp Development and Validation Test Procedures", "normType":"Automobil Standards" } , { "id":"809", "name":"Gore rain tower specifications", "description":"Gore rain tower specifications", "normType":"Additional Dust & Water Testing Standards" } , { "id":"810", "name":"HELLA-Norm N67017-02", "description":"Be- und Enttauungspr\u00fcfung f\u00fcr Scheinwerfer und Leuchten - Anforderungsklassen 2, 3, 4, 8, 9 und 10", "normType":"Automobil Standards" } , { "id":"811", "name":"HELLA-Norm N67017-03", "description":"Schutz gegen Spritzwasser - IPX4K", "normType":"Automobil Standards" } , { "id":"815", "name":"IEC 60068-1", "description":"Environmental testing - Part 1: General and guidance (page 12 ff)", "normType":"International Testing Standards" } , { "id":"819", "name":"IEC 60068-2-18", "description":"Environmental testing - Part 2: Tests; Test R and guidance: Water ", "normType":"International Testing Standards" } , { "id":"843", "name":"ISO 20 653", "description":"Road vehicles - Degrees of protection (IP-Code) -Protection of electrical equipment against foreign objects, water and access", "normType":"International Testing Standards" } , { "id":"847", "name":"IVECO Standard 16-0142", "description":"Rain Test for Water-Tightness", "normType":"Automobil Standards" } , { "id":"875", "name":"MIL-STD-210 C", "description":"Climatic Information to Determine Design and Test Requirements for Military Systems and Equipment", "normType":"Additional Dust & Water Testing Standards" } , { "id":"885", "name":"MIL-STD-810 C, Method 506.1", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"886", "name":"MIL-STD-810 D, Method 506.2", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"887", "name":"MIL-STD-810 E, Method 506.3", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"888", "name":"MIL-STD-810 F, Method 506.4", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"893", "name":"MIL-STD-810 G, Method 506.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"899", "name":"NEMA 250", "description":"Enclosures for Electrical Equipment (1000 Volts Maximum)", "normType":"International Testing Standards" } , { "id":"902", "name":"Nissan 26010NDS00", "description":"Lamp Development and Validation Test Procedures - Front Lamp", "normType":"Automobil Standards" } , { "id":"903", "name":"Nissan 26550NDS00", "description":"Lamp Development and Validation Test Procedures - Rear Lamp", "normType":"Automobil Standards" } , { "id":"905", "name":"PSA B25 7110", "description":"Normes v\u00e9hicules", "normType":"Automobil Standards" } , { "id":"906", "name":"PSA PEUGEOT CITRO\u00cbN", "description":"", "normType":"Automobil Standards" } , { "id":"907", "name":"Renault 32-09-827", "description":"Au\u00dfenspiegel elektrisch verstellbar", "normType":"Automobil Standards" } , { "id":"908", "name":"Renault 36-00-801", "description":"Verification des protections sur materials electriques contre la projection d\u00b4eau", "normType":"Automobil Standards" } , { "id":"912", "name":"SAW-Norm 67 007-03", "description":"Schutz gegen Spritzwasser - IPX4K", "normType":"Automobil Standards" } , { "id":"923", "name":"VDA AK 1.4.2", "description":"Qualification Test for E-fan with EC\/DC drive motor", "normType":"Automobil Standards" } , { "id":"927", "name":"Volkswagen 80000", "description":"Electric and Electronic Components in Motor Vehicles up to 3,5 t - General Requirements, Test Conditions and Tests", "normType":"Automobil Standards" } , { "id":"934", "name":"Volkswagen TL909", "description":"Headlights Europe\/USA - Functional Requirements", "normType":"Automobil Standards" } , { "id":"940", "name":"VTL 1600-001", "description":"Luftfahrt-Bordger\u00e4te", "normType":"Automobil Standards" } ] } , { "name":"SWT IPX3\/IPX4", "deviceName":"SprayEvent", "category":"Dust & Water", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/spritz-und-spruehwassertestgeraet-typ-swt", "randomNumber":"15", "norms": [ { "id":"737", "name":"BMW GS 95 003-4", "description":"Electrical\/Electronic Assemblies in Motor Vehicles \/ Climatic Requirements", "normType":"Automobil Standards" } , { "id":"742", "name":"BMW QV 63025 08_03", "description":"Abblend- \/ Fernlicht \u2013 Scheinwerfer f\u00fcr Halogen- und Xenon-Systeme", "normType":"Automobil Standards" } , { "id":"747", "name":"BS 5490", "description":"Specification for classification of degrees of protection provided by enclosures", "normType":"International Testing Standards" } , { "id":"748", "name":"CAM-EG-13", "description":"Rain", "normType":"Automobil Standards" } , { "id":"749", "name":"CEI IEC 529", "description":"Degrees of protection provided by enclosures (IP-Code)", "normType":"International Testing Standards" } , { "id":"750", "name":"Chrysler TP 3200A", "description":"Water Sealing Test", "normType":"Automobil Standards" } , { "id":"751", "name":"CSN 03 8827", "description":"Widerstandsf\u00e4higkeitspr\u00fcfungen", "normType":"International Testing Standards" } , { "id":"754", "name":"DIN 40050 T1", "description":"IP-Schutzarten, Ber\u00fchrungs- Fremdk\u00f6rper- und Wasserschutz f\u00fcr elektrische Betriebsmittel", "normType":"International Testing Standards" } , { "id":"755", "name":"DIN 40050 T9", "description":"IP-Schutzarten, Schutz gegen Fremdk\u00f6rper, Wasser und Ber\u00fchren - Elektrische Ausr\u00fcstung", "normType":"International Testing Standards" } , { "id":"756", "name":"DIN 40052", "description":"Degrees of protection provided by enclosures; test to check protection against ingress of solid foreign bodies, dust chamber", "normType":"International Testing Standards" } , { "id":"757", "name":"DIN 40053 T1", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Tropfger\u00e4t", "normType":"International Testing Standards" } , { "id":"758", "name":"DIN 40053 T2", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Schwenkrohr", "normType":"International Testing Standards" } , { "id":"759", "name":"DIN 40053 T3", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Spritzbrause", "normType":"International Testing Standards" } , { "id":"760", "name":"DIN 40053 T4", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Strahld\u00fcse", "normType":"International Testing Standards" } , { "id":"761", "name":"DIN 40053 T5", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Tropfwasserbrause", "normType":"International Testing Standards" } , { "id":"767", "name":"DIN 58390 T7", "description":"Umweltpr\u00fcfung von optischen Ger\u00e4ten - Regen", "normType":"International Testing Standards" } , { "id":"769", "name":"DIN EN 60034-18-1", "description":"Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines ", "normType":"International Testing Standards" } , { "id":"770", "name":"DIN EN 60034-18-21", "description":"Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification", "normType":"International Testing Standards" } , { "id":"771", "name":"DIN EN 60034-5", "description":"Rotating electrical machines - Part 5: Degrees of protection provided by integral design of rotating electrical machines (IP code) - Classification ", "normType":"International Testing Standards" } , { "id":"772", "name":"DIN EN 60529", "description":"Specification for degrees of protection provided by enclosures (IP code)", "normType":"International Testing Standards" } , { "id":"780", "name":"DIN IEC 34 T5", "description":"Umlaufende elektrische Maschinen - IP-Schutzarten; Einteilung der Schutzarten durch Geh\u00e4use f\u00fcr umlaufende Maschinen", "normType":"International Testing Standards" } , { "id":"782", "name":"DIN IEC 60068-1", "description":"Grundlegende Umweltpr\u00fcfverfahren - Teil 1: Allgemeines", "normType":"International Testing Standards" } , { "id":"783", "name":"DIN ISO 9022-7", "description":"Optics and photonics - Environmental test methods - Part 7: Resistance to drip or rain ", "normType":"International Testing Standards" } , { "id":"784", "name":"ECE R6", "description":"Best\u00e4ndigkeit gegen\u00fcber \u00e4u\u00dferen Einfl\u00fcssen", "normType":"International Testing Standards" } , { "id":"795", "name":"FMVSS108", "description":"Lamp, Reflective Devices and Associated Equipment", "normType":"International Testing Standards" } , { "id":"800", "name":"General Motors GME 12505-1", "description":"General Specification Exterior - Lamps and Headlamps", "normType":"Automobil Standards" } , { "id":"801", "name":"General Motors GMW 14639", "description":"Lamps and Headlamps", "normType":"Automobil Standards" } , { "id":"802", "name":"General Motors GMW 14906", "description":"General Specification Exterior - Lamp Development and Validation Test Procedures", "normType":"Automobil Standards" } , { "id":"809", "name":"Gore rain tower specifications", "description":"Gore rain tower specifications", "normType":"Additional Dust & Water Testing Standards" } , { "id":"810", "name":"HELLA-Norm N67017-02", "description":"Be- und Enttauungspr\u00fcfung f\u00fcr Scheinwerfer und Leuchten - Anforderungsklassen 2, 3, 4, 8, 9 und 10", "normType":"Automobil Standards" } , { "id":"811", "name":"HELLA-Norm N67017-03", "description":"Schutz gegen Spritzwasser - IPX4K", "normType":"Automobil Standards" } , { "id":"815", "name":"IEC 60068-1", "description":"Environmental testing - Part 1: General and guidance (page 12 ff)", "normType":"International Testing Standards" } , { "id":"819", "name":"IEC 60068-2-18", "description":"Environmental testing - Part 2: Tests; Test R and guidance: Water ", "normType":"International Testing Standards" } , { "id":"843", "name":"ISO 20 653", "description":"Road vehicles - Degrees of protection (IP-Code) -Protection of electrical equipment against foreign objects, water and access", "normType":"International Testing Standards" } , { "id":"847", "name":"IVECO Standard 16-0142", "description":"Rain Test for Water-Tightness", "normType":"Automobil Standards" } , { "id":"875", "name":"MIL-STD-210 C", "description":"Climatic Information to Determine Design and Test Requirements for Military Systems and Equipment", "normType":"Additional Dust & Water Testing Standards" } , { "id":"885", "name":"MIL-STD-810 C, Method 506.1", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"886", "name":"MIL-STD-810 D, Method 506.2", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"887", "name":"MIL-STD-810 E, Method 506.3", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"888", "name":"MIL-STD-810 F, Method 506.4", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"893", "name":"MIL-STD-810 G, Method 506.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"902", "name":"Nissan 26010NDS00", "description":"Lamp Development and Validation Test Procedures - Front Lamp", "normType":"Automobil Standards" } , { "id":"903", "name":"Nissan 26550NDS00", "description":"Lamp Development and Validation Test Procedures - Rear Lamp", "normType":"Automobil Standards" } , { "id":"905", "name":"PSA B25 7110", "description":"Normes v\u00e9hicules", "normType":"Automobil Standards" } , { "id":"906", "name":"PSA PEUGEOT CITRO\u00cbN", "description":"", "normType":"Automobil Standards" } , { "id":"907", "name":"Renault 32-09-827", "description":"Au\u00dfenspiegel elektrisch verstellbar", "normType":"Automobil Standards" } , { "id":"908", "name":"Renault 36-00-801", "description":"Verification des protections sur materials electriques contre la projection d\u00b4eau", "normType":"Automobil Standards" } , { "id":"912", "name":"SAW-Norm 67 007-03", "description":"Schutz gegen Spritzwasser - IPX4K", "normType":"Automobil Standards" } , { "id":"923", "name":"VDA AK 1.4.2", "description":"Qualification Test for E-fan with EC\/DC drive motor", "normType":"Automobil Standards" } , { "id":"927", "name":"Volkswagen 80000", "description":"Electric and Electronic Components in Motor Vehicles up to 3,5 t - General Requirements, Test Conditions and Tests", "normType":"Automobil Standards" } , { "id":"933", "name":"Volkswagen PV 3501", "description":"Scheinwerfer und Au\u00dfenleuchten - Pr\u00fcfung der Spritzwasserdichtheit", "normType":"Automobil Standards" } , { "id":"934", "name":"Volkswagen TL909", "description":"Headlights Europe\/USA - Functional Requirements", "normType":"Automobil Standards" } , { "id":"940", "name":"VTL 1600-001", "description":"Luftfahrt-Bordger\u00e4te", "normType":"Automobil Standards" } ] } , { "name":"SWT IPX4K", "deviceName":"SprayEvent", "category":"Dust & Water", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/spritz-und-spruehwassertestgeraet-typ-swt", "randomNumber":"44", "norms": [ { "id":"737", "name":"BMW GS 95 003-4", "description":"Electrical\/Electronic Assemblies in Motor Vehicles \/ Climatic Requirements", "normType":"Automobil Standards" } , { "id":"742", "name":"BMW QV 63025 08_03", "description":"Abblend- \/ Fernlicht \u2013 Scheinwerfer f\u00fcr Halogen- und Xenon-Systeme", "normType":"Automobil Standards" } , { "id":"747", "name":"BS 5490", "description":"Specification for classification of degrees of protection provided by enclosures", "normType":"International Testing Standards" } , { "id":"748", "name":"CAM-EG-13", "description":"Rain", "normType":"Automobil Standards" } , { "id":"749", "name":"CEI IEC 529", "description":"Degrees of protection provided by enclosures (IP-Code)", "normType":"International Testing Standards" } , { "id":"750", "name":"Chrysler TP 3200A", "description":"Water Sealing Test", "normType":"Automobil Standards" } , { "id":"754", "name":"DIN 40050 T1", "description":"IP-Schutzarten, Ber\u00fchrungs- Fremdk\u00f6rper- und Wasserschutz f\u00fcr elektrische Betriebsmittel", "normType":"International Testing Standards" } , { "id":"755", "name":"DIN 40050 T9", "description":"IP-Schutzarten, Schutz gegen Fremdk\u00f6rper, Wasser und Ber\u00fchren - Elektrische Ausr\u00fcstung", "normType":"International Testing Standards" } , { "id":"756", "name":"DIN 40052", "description":"Degrees of protection provided by enclosures; test to check protection against ingress of solid foreign bodies, dust chamber", "normType":"International Testing Standards" } , { "id":"757", "name":"DIN 40053 T1", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Tropfger\u00e4t", "normType":"International Testing Standards" } , { "id":"758", "name":"DIN 40053 T2", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Schwenkrohr", "normType":"International Testing Standards" } , { "id":"759", "name":"DIN 40053 T3", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Spritzbrause", "normType":"International Testing Standards" } , { "id":"760", "name":"DIN 40053 T4", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Strahld\u00fcse", "normType":"International Testing Standards" } , { "id":"761", "name":"DIN 40053 T5", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Tropfwasserbrause", "normType":"International Testing Standards" } , { "id":"767", "name":"DIN 58390 T7", "description":"Umweltpr\u00fcfung von optischen Ger\u00e4ten - Regen", "normType":"International Testing Standards" } , { "id":"769", "name":"DIN EN 60034-18-1", "description":"Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines ", "normType":"International Testing Standards" } , { "id":"770", "name":"DIN EN 60034-18-21", "description":"Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification", "normType":"International Testing Standards" } , { "id":"772", "name":"DIN EN 60529", "description":"Specification for degrees of protection provided by enclosures (IP code)", "normType":"International Testing Standards" } , { "id":"782", "name":"DIN IEC 60068-1", "description":"Grundlegende Umweltpr\u00fcfverfahren - Teil 1: Allgemeines", "normType":"International Testing Standards" } , { "id":"783", "name":"DIN ISO 9022-7", "description":"Optics and photonics - Environmental test methods - Part 7: Resistance to drip or rain ", "normType":"International Testing Standards" } , { "id":"784", "name":"ECE R6", "description":"Best\u00e4ndigkeit gegen\u00fcber \u00e4u\u00dferen Einfl\u00fcssen", "normType":"International Testing Standards" } , { "id":"795", "name":"FMVSS108", "description":"Lamp, Reflective Devices and Associated Equipment", "normType":"International Testing Standards" } , { "id":"800", "name":"General Motors GME 12505-1", "description":"General Specification Exterior - Lamps and Headlamps", "normType":"Automobil Standards" } , { "id":"801", "name":"General Motors GMW 14639", "description":"Lamps and Headlamps", "normType":"Automobil Standards" } , { "id":"802", "name":"General Motors GMW 14906", "description":"General Specification Exterior - Lamp Development and Validation Test Procedures", "normType":"Automobil Standards" } , { "id":"809", "name":"Gore rain tower specifications", "description":"Gore rain tower specifications", "normType":"Additional Dust & Water Testing Standards" } , { "id":"810", "name":"HELLA-Norm N67017-02", "description":"Be- und Enttauungspr\u00fcfung f\u00fcr Scheinwerfer und Leuchten - Anforderungsklassen 2, 3, 4, 8, 9 und 10", "normType":"Automobil Standards" } , { "id":"811", "name":"HELLA-Norm N67017-03", "description":"Schutz gegen Spritzwasser - IPX4K", "normType":"Automobil Standards" } , { "id":"815", "name":"IEC 60068-1", "description":"Environmental testing - Part 1: General and guidance (page 12 ff)", "normType":"International Testing Standards" } , { "id":"843", "name":"ISO 20 653", "description":"Road vehicles - Degrees of protection (IP-Code) -Protection of electrical equipment against foreign objects, water and access", "normType":"International Testing Standards" } , { "id":"847", "name":"IVECO Standard 16-0142", "description":"Rain Test for Water-Tightness", "normType":"Automobil Standards" } , { "id":"875", "name":"MIL-STD-210 C", "description":"Climatic Information to Determine Design and Test Requirements for Military Systems and Equipment", "normType":"Additional Dust & Water Testing Standards" } , { "id":"885", "name":"MIL-STD-810 C, Method 506.1", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"886", "name":"MIL-STD-810 D, Method 506.2", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"887", "name":"MIL-STD-810 E, Method 506.3", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"888", "name":"MIL-STD-810 F, Method 506.4", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"893", "name":"MIL-STD-810 G, Method 506.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"902", "name":"Nissan 26010NDS00", "description":"Lamp Development and Validation Test Procedures - Front Lamp", "normType":"Automobil Standards" } , { "id":"903", "name":"Nissan 26550NDS00", "description":"Lamp Development and Validation Test Procedures - Rear Lamp", "normType":"Automobil Standards" } , { "id":"905", "name":"PSA B25 7110", "description":"Normes v\u00e9hicules", "normType":"Automobil Standards" } , { "id":"906", "name":"PSA PEUGEOT CITRO\u00cbN", "description":"", "normType":"Automobil Standards" } , { "id":"907", "name":"Renault 32-09-827", "description":"Au\u00dfenspiegel elektrisch verstellbar", "normType":"Automobil Standards" } , { "id":"908", "name":"Renault 36-00-801", "description":"Verification des protections sur materials electriques contre la projection d\u00b4eau", "normType":"Automobil Standards" } , { "id":"912", "name":"SAW-Norm 67 007-03", "description":"Schutz gegen Spritzwasser - IPX4K", "normType":"Automobil Standards" } , { "id":"923", "name":"VDA AK 1.4.2", "description":"Qualification Test for E-fan with EC\/DC drive motor", "normType":"Automobil Standards" } , { "id":"927", "name":"Volkswagen 80000", "description":"Electric and Electronic Components in Motor Vehicles up to 3,5 t - General Requirements, Test Conditions and Tests", "normType":"Automobil Standards" } , { "id":"934", "name":"Volkswagen TL909", "description":"Headlights Europe\/USA - Functional Requirements", "normType":"Automobil Standards" } , { "id":"940", "name":"VTL 1600-001", "description":"Luftfahrt-Bordger\u00e4te", "normType":"Automobil Standards" } ] } , { "name":"SWT IPX5\/IPX6", "deviceName":"SprayEvent", "category":"Dust & Water", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/spritz-und-spruehwassertestgeraet-typ-swt", "randomNumber":"45", "norms": [ { "id":"737", "name":"BMW GS 95 003-4", "description":"Electrical\/Electronic Assemblies in Motor Vehicles \/ Climatic Requirements", "normType":"Automobil Standards" } , { "id":"742", "name":"BMW QV 63025 08_03", "description":"Abblend- \/ Fernlicht \u2013 Scheinwerfer f\u00fcr Halogen- und Xenon-Systeme", "normType":"Automobil Standards" } , { "id":"747", "name":"BS 5490", "description":"Specification for classification of degrees of protection provided by enclosures", "normType":"International Testing Standards" } , { "id":"748", "name":"CAM-EG-13", "description":"Rain", "normType":"Automobil Standards" } , { "id":"749", "name":"CEI IEC 529", "description":"Degrees of protection provided by enclosures (IP-Code)", "normType":"International Testing Standards" } , { "id":"750", "name":"Chrysler TP 3200A", "description":"Water Sealing Test", "normType":"Automobil Standards" } , { "id":"754", "name":"DIN 40050 T1", "description":"IP-Schutzarten, Ber\u00fchrungs- Fremdk\u00f6rper- und Wasserschutz f\u00fcr elektrische Betriebsmittel", "normType":"International Testing Standards" } , { "id":"755", "name":"DIN 40050 T9", "description":"IP-Schutzarten, Schutz gegen Fremdk\u00f6rper, Wasser und Ber\u00fchren - Elektrische Ausr\u00fcstung", "normType":"International Testing Standards" } , { "id":"756", "name":"DIN 40052", "description":"Degrees of protection provided by enclosures; test to check protection against ingress of solid foreign bodies, dust chamber", "normType":"International Testing Standards" } , { "id":"757", "name":"DIN 40053 T1", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Tropfger\u00e4t", "normType":"International Testing Standards" } , { "id":"758", "name":"DIN 40053 T2", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Schwenkrohr", "normType":"International Testing Standards" } , { "id":"759", "name":"DIN 40053 T3", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Spritzbrause", "normType":"International Testing Standards" } , { "id":"760", "name":"DIN 40053 T4", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Strahld\u00fcse", "normType":"International Testing Standards" } , { "id":"761", "name":"DIN 40053 T5", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Tropfwasserbrause", "normType":"International Testing Standards" } , { "id":"767", "name":"DIN 58390 T7", "description":"Umweltpr\u00fcfung von optischen Ger\u00e4ten - Regen", "normType":"International Testing Standards" } , { "id":"769", "name":"DIN EN 60034-18-1", "description":"Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines ", "normType":"International Testing Standards" } , { "id":"770", "name":"DIN EN 60034-18-21", "description":"Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification", "normType":"International Testing Standards" } , { "id":"771", "name":"DIN EN 60034-5", "description":"Rotating electrical machines - Part 5: Degrees of protection provided by integral design of rotating electrical machines (IP code) - Classification ", "normType":"International Testing Standards" } , { "id":"772", "name":"DIN EN 60529", "description":"Specification for degrees of protection provided by enclosures (IP code)", "normType":"International Testing Standards" } , { "id":"780", "name":"DIN IEC 34 T5", "description":"Umlaufende elektrische Maschinen - IP-Schutzarten; Einteilung der Schutzarten durch Geh\u00e4use f\u00fcr umlaufende Maschinen", "normType":"International Testing Standards" } , { "id":"782", "name":"DIN IEC 60068-1", "description":"Grundlegende Umweltpr\u00fcfverfahren - Teil 1: Allgemeines", "normType":"International Testing Standards" } , { "id":"783", "name":"DIN ISO 9022-7", "description":"Optics and photonics - Environmental test methods - Part 7: Resistance to drip or rain ", "normType":"International Testing Standards" } , { "id":"784", "name":"ECE R6", "description":"Best\u00e4ndigkeit gegen\u00fcber \u00e4u\u00dferen Einfl\u00fcssen", "normType":"International Testing Standards" } , { "id":"795", "name":"FMVSS108", "description":"Lamp, Reflective Devices and Associated Equipment", "normType":"International Testing Standards" } , { "id":"800", "name":"General Motors GME 12505-1", "description":"General Specification Exterior - Lamps and Headlamps", "normType":"Automobil Standards" } , { "id":"801", "name":"General Motors GMW 14639", "description":"Lamps and Headlamps", "normType":"Automobil Standards" } , { "id":"802", "name":"General Motors GMW 14906", "description":"General Specification Exterior - Lamp Development and Validation Test Procedures", "normType":"Automobil Standards" } , { "id":"809", "name":"Gore rain tower specifications", "description":"Gore rain tower specifications", "normType":"Additional Dust & Water Testing Standards" } , { "id":"810", "name":"HELLA-Norm N67017-02", "description":"Be- und Enttauungspr\u00fcfung f\u00fcr Scheinwerfer und Leuchten - Anforderungsklassen 2, 3, 4, 8, 9 und 10", "normType":"Automobil Standards" } , { "id":"811", "name":"HELLA-Norm N67017-03", "description":"Schutz gegen Spritzwasser - IPX4K", "normType":"Automobil Standards" } , { "id":"815", "name":"IEC 60068-1", "description":"Environmental testing - Part 1: General and guidance (page 12 ff)", "normType":"International Testing Standards" } , { "id":"819", "name":"IEC 60068-2-18", "description":"Environmental testing - Part 2: Tests; Test R and guidance: Water ", "normType":"International Testing Standards" } , { "id":"843", "name":"ISO 20 653", "description":"Road vehicles - Degrees of protection (IP-Code) -Protection of electrical equipment against foreign objects, water and access", "normType":"International Testing Standards" } , { "id":"847", "name":"IVECO Standard 16-0142", "description":"Rain Test for Water-Tightness", "normType":"Automobil Standards" } , { "id":"875", "name":"MIL-STD-210 C", "description":"Climatic Information to Determine Design and Test Requirements for Military Systems and Equipment", "normType":"Additional Dust & Water Testing Standards" } , { "id":"885", "name":"MIL-STD-810 C, Method 506.1", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"886", "name":"MIL-STD-810 D, Method 506.2", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"887", "name":"MIL-STD-810 E, Method 506.3", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"888", "name":"MIL-STD-810 F, Method 506.4", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"893", "name":"MIL-STD-810 G, Method 506.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"902", "name":"Nissan 26010NDS00", "description":"Lamp Development and Validation Test Procedures - Front Lamp", "normType":"Automobil Standards" } , { "id":"903", "name":"Nissan 26550NDS00", "description":"Lamp Development and Validation Test Procedures - Rear Lamp", "normType":"Automobil Standards" } , { "id":"905", "name":"PSA B25 7110", "description":"Normes v\u00e9hicules", "normType":"Automobil Standards" } , { "id":"906", "name":"PSA PEUGEOT CITRO\u00cbN", "description":"", "normType":"Automobil Standards" } , { "id":"907", "name":"Renault 32-09-827", "description":"Au\u00dfenspiegel elektrisch verstellbar", "normType":"Automobil Standards" } , { "id":"908", "name":"Renault 36-00-801", "description":"Verification des protections sur materials electriques contre la projection d\u00b4eau", "normType":"Automobil Standards" } , { "id":"912", "name":"SAW-Norm 67 007-03", "description":"Schutz gegen Spritzwasser - IPX4K", "normType":"Automobil Standards" } , { "id":"923", "name":"VDA AK 1.4.2", "description":"Qualification Test for E-fan with EC\/DC drive motor", "normType":"Automobil Standards" } , { "id":"927", "name":"Volkswagen 80000", "description":"Electric and Electronic Components in Motor Vehicles up to 3,5 t - General Requirements, Test Conditions and Tests", "normType":"Automobil Standards" } , { "id":"934", "name":"Volkswagen TL909", "description":"Headlights Europe\/USA - Functional Requirements", "normType":"Automobil Standards" } , { "id":"940", "name":"VTL 1600-001", "description":"Luftfahrt-Bordger\u00e4te", "normType":"Automobil Standards" } ] } , { "name":"SWT IPX6K", "deviceName":"SprayEvent", "category":"Dust & Water", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/spritz-und-spruehwassertestgeraet-typ-swt", "randomNumber":"1", "norms": [ { "id":"737", "name":"BMW GS 95 003-4", "description":"Electrical\/Electronic Assemblies in Motor Vehicles \/ Climatic Requirements", "normType":"Automobil Standards" } , { "id":"742", "name":"BMW QV 63025 08_03", "description":"Abblend- \/ Fernlicht \u2013 Scheinwerfer f\u00fcr Halogen- und Xenon-Systeme", "normType":"Automobil Standards" } , { "id":"747", "name":"BS 5490", "description":"Specification for classification of degrees of protection provided by enclosures", "normType":"International Testing Standards" } , { "id":"748", "name":"CAM-EG-13", "description":"Rain", "normType":"Automobil Standards" } , { "id":"749", "name":"CEI IEC 529", "description":"Degrees of protection provided by enclosures (IP-Code)", "normType":"International Testing Standards" } , { "id":"750", "name":"Chrysler TP 3200A", "description":"Water Sealing Test", "normType":"Automobil Standards" } , { "id":"754", "name":"DIN 40050 T1", "description":"IP-Schutzarten, Ber\u00fchrungs- Fremdk\u00f6rper- und Wasserschutz f\u00fcr elektrische Betriebsmittel", "normType":"International Testing Standards" } , { "id":"755", "name":"DIN 40050 T9", "description":"IP-Schutzarten, Schutz gegen Fremdk\u00f6rper, Wasser und Ber\u00fchren - Elektrische Ausr\u00fcstung", "normType":"International Testing Standards" } , { "id":"756", "name":"DIN 40052", "description":"Degrees of protection provided by enclosures; test to check protection against ingress of solid foreign bodies, dust chamber", "normType":"International Testing Standards" } , { "id":"757", "name":"DIN 40053 T1", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Tropfger\u00e4t", "normType":"International Testing Standards" } , { "id":"758", "name":"DIN 40053 T2", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Schwenkrohr", "normType":"International Testing Standards" } , { "id":"759", "name":"DIN 40053 T3", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Spritzbrause", "normType":"International Testing Standards" } , { "id":"760", "name":"DIN 40053 T4", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Strahld\u00fcse", "normType":"International Testing Standards" } , { "id":"761", "name":"DIN 40053 T5", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Tropfwasserbrause", "normType":"International Testing Standards" } , { "id":"767", "name":"DIN 58390 T7", "description":"Umweltpr\u00fcfung von optischen Ger\u00e4ten - Regen", "normType":"International Testing Standards" } , { "id":"769", "name":"DIN EN 60034-18-1", "description":"Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines ", "normType":"International Testing Standards" } , { "id":"770", "name":"DIN EN 60034-18-21", "description":"Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification", "normType":"International Testing Standards" } , { "id":"772", "name":"DIN EN 60529", "description":"Specification for degrees of protection provided by enclosures (IP code)", "normType":"International Testing Standards" } , { "id":"782", "name":"DIN IEC 60068-1", "description":"Grundlegende Umweltpr\u00fcfverfahren - Teil 1: Allgemeines", "normType":"International Testing Standards" } , { "id":"783", "name":"DIN ISO 9022-7", "description":"Optics and photonics - Environmental test methods - Part 7: Resistance to drip or rain ", "normType":"International Testing Standards" } , { "id":"784", "name":"ECE R6", "description":"Best\u00e4ndigkeit gegen\u00fcber \u00e4u\u00dferen Einfl\u00fcssen", "normType":"International Testing Standards" } , { "id":"795", "name":"FMVSS108", "description":"Lamp, Reflective Devices and Associated Equipment", "normType":"International Testing Standards" } , { "id":"800", "name":"General Motors GME 12505-1", "description":"General Specification Exterior - Lamps and Headlamps", "normType":"Automobil Standards" } , { "id":"801", "name":"General Motors GMW 14639", "description":"Lamps and Headlamps", "normType":"Automobil Standards" } , { "id":"802", "name":"General Motors GMW 14906", "description":"General Specification Exterior - Lamp Development and Validation Test Procedures", "normType":"Automobil Standards" } , { "id":"809", "name":"Gore rain tower specifications", "description":"Gore rain tower specifications", "normType":"Additional Dust & Water Testing Standards" } , { "id":"810", "name":"HELLA-Norm N67017-02", "description":"Be- und Enttauungspr\u00fcfung f\u00fcr Scheinwerfer und Leuchten - Anforderungsklassen 2, 3, 4, 8, 9 und 10", "normType":"Automobil Standards" } , { "id":"811", "name":"HELLA-Norm N67017-03", "description":"Schutz gegen Spritzwasser - IPX4K", "normType":"Automobil Standards" } , { "id":"815", "name":"IEC 60068-1", "description":"Environmental testing - Part 1: General and guidance (page 12 ff)", "normType":"International Testing Standards" } , { "id":"843", "name":"ISO 20 653", "description":"Road vehicles - Degrees of protection (IP-Code) -Protection of electrical equipment against foreign objects, water and access", "normType":"International Testing Standards" } , { "id":"847", "name":"IVECO Standard 16-0142", "description":"Rain Test for Water-Tightness", "normType":"Automobil Standards" } , { "id":"875", "name":"MIL-STD-210 C", "description":"Climatic Information to Determine Design and Test Requirements for Military Systems and Equipment", "normType":"Additional Dust & Water Testing Standards" } , { "id":"885", "name":"MIL-STD-810 C, Method 506.1", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"886", "name":"MIL-STD-810 D, Method 506.2", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"887", "name":"MIL-STD-810 E, Method 506.3", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"888", "name":"MIL-STD-810 F, Method 506.4", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"893", "name":"MIL-STD-810 G, Method 506.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"902", "name":"Nissan 26010NDS00", "description":"Lamp Development and Validation Test Procedures - Front Lamp", "normType":"Automobil Standards" } , { "id":"903", "name":"Nissan 26550NDS00", "description":"Lamp Development and Validation Test Procedures - Rear Lamp", "normType":"Automobil Standards" } , { "id":"905", "name":"PSA B25 7110", "description":"Normes v\u00e9hicules", "normType":"Automobil Standards" } , { "id":"906", "name":"PSA PEUGEOT CITRO\u00cbN", "description":"", "normType":"Automobil Standards" } , { "id":"907", "name":"Renault 32-09-827", "description":"Au\u00dfenspiegel elektrisch verstellbar", "normType":"Automobil Standards" } , { "id":"908", "name":"Renault 36-00-801", "description":"Verification des protections sur materials electriques contre la projection d\u00b4eau", "normType":"Automobil Standards" } , { "id":"912", "name":"SAW-Norm 67 007-03", "description":"Schutz gegen Spritzwasser - IPX4K", "normType":"Automobil Standards" } , { "id":"923", "name":"VDA AK 1.4.2", "description":"Qualification Test for E-fan with EC\/DC drive motor", "normType":"Automobil Standards" } , { "id":"927", "name":"Volkswagen 80000", "description":"Electric and Electronic Components in Motor Vehicles up to 3,5 t - General Requirements, Test Conditions and Tests", "normType":"Automobil Standards" } , { "id":"934", "name":"Volkswagen TL909", "description":"Headlights Europe\/USA - Functional Requirements", "normType":"Automobil Standards" } , { "id":"940", "name":"VTL 1600-001", "description":"Luftfahrt-Bordger\u00e4te", "normType":"Automobil Standards" } ] } , { "name":"SWT IPX9K", "deviceName":"SprayEvent", "category":"Dust & Water", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/spritz-und-spruehwassertestgeraet-typ-swt", "randomNumber":"5", "norms": [ { "id":"737", "name":"BMW GS 95 003-4", "description":"Electrical\/Electronic Assemblies in Motor Vehicles \/ Climatic Requirements", "normType":"Automobil Standards" } , { "id":"742", "name":"BMW QV 63025 08_03", "description":"Abblend- \/ Fernlicht \u2013 Scheinwerfer f\u00fcr Halogen- und Xenon-Systeme", "normType":"Automobil Standards" } , { "id":"747", "name":"BS 5490", "description":"Specification for classification of degrees of protection provided by enclosures", "normType":"International Testing Standards" } , { "id":"748", "name":"CAM-EG-13", "description":"Rain", "normType":"Automobil Standards" } , { "id":"749", "name":"CEI IEC 529", "description":"Degrees of protection provided by enclosures (IP-Code)", "normType":"International Testing Standards" } , { "id":"750", "name":"Chrysler TP 3200A", "description":"Water Sealing Test", "normType":"Automobil Standards" } , { "id":"754", "name":"DIN 40050 T1", "description":"IP-Schutzarten, Ber\u00fchrungs- Fremdk\u00f6rper- und Wasserschutz f\u00fcr elektrische Betriebsmittel", "normType":"International Testing Standards" } , { "id":"755", "name":"DIN 40050 T9", "description":"IP-Schutzarten, Schutz gegen Fremdk\u00f6rper, Wasser und Ber\u00fchren - Elektrische Ausr\u00fcstung", "normType":"International Testing Standards" } , { "id":"756", "name":"DIN 40052", "description":"Degrees of protection provided by enclosures; test to check protection against ingress of solid foreign bodies, dust chamber", "normType":"International Testing Standards" } , { "id":"757", "name":"DIN 40053 T1", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Tropfger\u00e4t", "normType":"International Testing Standards" } , { "id":"758", "name":"DIN 40053 T2", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Schwenkrohr", "normType":"International Testing Standards" } , { "id":"759", "name":"DIN 40053 T3", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Spritzbrause", "normType":"International Testing Standards" } , { "id":"760", "name":"DIN 40053 T4", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Strahld\u00fcse", "normType":"International Testing Standards" } , { "id":"761", "name":"DIN 40053 T5", "description":"IP-Schutzarten - Pr\u00fcfung desWasserschutzes - Tropfwasserbrause", "normType":"International Testing Standards" } , { "id":"767", "name":"DIN 58390 T7", "description":"Umweltpr\u00fcfung von optischen Ger\u00e4ten - Regen", "normType":"International Testing Standards" } , { "id":"769", "name":"DIN EN 60034-18-1", "description":"Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines ", "normType":"International Testing Standards" } , { "id":"770", "name":"DIN EN 60034-18-21", "description":"Rotating electrical machines - Part 18-21: Functional evaluation of insulation systems - Test procedures for wire-wound windings - Thermal evaluation and classification", "normType":"International Testing Standards" } , { "id":"772", "name":"DIN EN 60529", "description":"Specification for degrees of protection provided by enclosures (IP code)", "normType":"International Testing Standards" } , { "id":"782", "name":"DIN IEC 60068-1", "description":"Grundlegende Umweltpr\u00fcfverfahren - Teil 1: Allgemeines", "normType":"International Testing Standards" } , { "id":"783", "name":"DIN ISO 9022-7", "description":"Optics and photonics - Environmental test methods - Part 7: Resistance to drip or rain ", "normType":"International Testing Standards" } , { "id":"784", "name":"ECE R6", "description":"Best\u00e4ndigkeit gegen\u00fcber \u00e4u\u00dferen Einfl\u00fcssen", "normType":"International Testing Standards" } , { "id":"795", "name":"FMVSS108", "description":"Lamp, Reflective Devices and Associated Equipment", "normType":"International Testing Standards" } , { "id":"800", "name":"General Motors GME 12505-1", "description":"General Specification Exterior - Lamps and Headlamps", "normType":"Automobil Standards" } , { "id":"801", "name":"General Motors GMW 14639", "description":"Lamps and Headlamps", "normType":"Automobil Standards" } , { "id":"802", "name":"General Motors GMW 14906", "description":"General Specification Exterior - Lamp Development and Validation Test Procedures", "normType":"Automobil Standards" } , { "id":"809", "name":"Gore rain tower specifications", "description":"Gore rain tower specifications", "normType":"Additional Dust & Water Testing Standards" } , { "id":"810", "name":"HELLA-Norm N67017-02", "description":"Be- und Enttauungspr\u00fcfung f\u00fcr Scheinwerfer und Leuchten - Anforderungsklassen 2, 3, 4, 8, 9 und 10", "normType":"Automobil Standards" } , { "id":"811", "name":"HELLA-Norm N67017-03", "description":"Schutz gegen Spritzwasser - IPX4K", "normType":"Automobil Standards" } , { "id":"815", "name":"IEC 60068-1", "description":"Environmental testing - Part 1: General and guidance (page 12 ff)", "normType":"International Testing Standards" } , { "id":"843", "name":"ISO 20 653", "description":"Road vehicles - Degrees of protection (IP-Code) -Protection of electrical equipment against foreign objects, water and access", "normType":"International Testing Standards" } , { "id":"847", "name":"IVECO Standard 16-0142", "description":"Rain Test for Water-Tightness", "normType":"Automobil Standards" } , { "id":"875", "name":"MIL-STD-210 C", "description":"Climatic Information to Determine Design and Test Requirements for Military Systems and Equipment", "normType":"Additional Dust & Water Testing Standards" } , { "id":"885", "name":"MIL-STD-810 C, Method 506.1", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"886", "name":"MIL-STD-810 D, Method 506.2", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"887", "name":"MIL-STD-810 E, Method 506.3", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"888", "name":"MIL-STD-810 F, Method 506.4", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"893", "name":"MIL-STD-810 G, Method 506.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"902", "name":"Nissan 26010NDS00", "description":"Lamp Development and Validation Test Procedures - Front Lamp", "normType":"Automobil Standards" } , { "id":"903", "name":"Nissan 26550NDS00", "description":"Lamp Development and Validation Test Procedures - Rear Lamp", "normType":"Automobil Standards" } , { "id":"905", "name":"PSA B25 7110", "description":"Normes v\u00e9hicules", "normType":"Automobil Standards" } , { "id":"906", "name":"PSA PEUGEOT CITRO\u00cbN", "description":"", "normType":"Automobil Standards" } , { "id":"907", "name":"Renault 32-09-827", "description":"Au\u00dfenspiegel elektrisch verstellbar", "normType":"Automobil Standards" } , { "id":"908", "name":"Renault 36-00-801", "description":"Verification des protections sur materials electriques contre la projection d\u00b4eau", "normType":"Automobil Standards" } , { "id":"912", "name":"SAW-Norm 67 007-03", "description":"Schutz gegen Spritzwasser - IPX4K", "normType":"Automobil Standards" } , { "id":"923", "name":"VDA AK 1.4.2", "description":"Qualification Test for E-fan with EC\/DC drive motor", "normType":"Automobil Standards" } , { "id":"927", "name":"Volkswagen 80000", "description":"Electric and Electronic Components in Motor Vehicles up to 3,5 t - General Requirements, Test Conditions and Tests", "normType":"Automobil Standards" } , { "id":"934", "name":"Volkswagen TL909", "description":"Headlights Europe\/USA - Functional Requirements", "normType":"Automobil Standards" } , { "id":"940", "name":"VTL 1600-001", "description":"Luftfahrt-Bordger\u00e4te", "normType":"Automobil Standards" } ] } , { "name":"SWT 1000-JIS", "deviceName":"SprayEvent", "category":"Dust & Water", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/spritz-und-spruehwassertestgeraet-typ-swt", "randomNumber":"8", "norms": [ { "id":"737", "name":"BMW GS 95 003-4", "description":"Electrical\/Electronic Assemblies in Motor Vehicles \/ Climatic Requirements", "normType":"Automobil Standards" } , { "id":"742", "name":"BMW QV 63025 08_03", "description":"Abblend- \/ Fernlicht \u2013 Scheinwerfer f\u00fcr Halogen- und Xenon-Systeme", "normType":"Automobil Standards" } , { "id":"748", "name":"CAM-EG-13", "description":"Rain", "normType":"Automobil Standards" } , { "id":"750", "name":"Chrysler TP 3200A", "description":"Water Sealing Test", "normType":"Automobil Standards" } , { "id":"784", "name":"ECE R6", "description":"Best\u00e4ndigkeit gegen\u00fcber \u00e4u\u00dferen Einfl\u00fcssen", "normType":"International Testing Standards" } , { "id":"795", "name":"FMVSS108", "description":"Lamp, Reflective Devices and Associated Equipment", "normType":"International Testing Standards" } , { "id":"800", "name":"General Motors GME 12505-1", "description":"General Specification Exterior - Lamps and Headlamps", "normType":"Automobil Standards" } , { "id":"801", "name":"General Motors GMW 14639", "description":"Lamps and Headlamps", "normType":"Automobil Standards" } , { "id":"802", "name":"General Motors GMW 14906", "description":"General Specification Exterior - Lamp Development and Validation Test Procedures", "normType":"Automobil Standards" } , { "id":"809", "name":"Gore rain tower specifications", "description":"Gore rain tower specifications", "normType":"Additional Dust & Water Testing Standards" } , { "id":"810", "name":"HELLA-Norm N67017-02", "description":"Be- und Enttauungspr\u00fcfung f\u00fcr Scheinwerfer und Leuchten - Anforderungsklassen 2, 3, 4, 8, 9 und 10", "normType":"Automobil Standards" } , { "id":"811", "name":"HELLA-Norm N67017-03", "description":"Schutz gegen Spritzwasser - IPX4K", "normType":"Automobil Standards" } , { "id":"847", "name":"IVECO Standard 16-0142", "description":"Rain Test for Water-Tightness", "normType":"Automobil Standards" } , { "id":"855", "name":"JIS D 0203", "description":"Method of moisture, rain and spray test for automobile parts", "normType":"International Testing Standards" } , { "id":"875", "name":"MIL-STD-210 C", "description":"Climatic Information to Determine Design and Test Requirements for Military Systems and Equipment", "normType":"Additional Dust & Water Testing Standards" } , { "id":"885", "name":"MIL-STD-810 C, Method 506.1", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"886", "name":"MIL-STD-810 D, Method 506.2", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"887", "name":"MIL-STD-810 E, Method 506.3", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"888", "name":"MIL-STD-810 F, Method 506.4", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"893", "name":"MIL-STD-810 G, Method 506.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"902", "name":"Nissan 26010NDS00", "description":"Lamp Development and Validation Test Procedures - Front Lamp", "normType":"Automobil Standards" } , { "id":"903", "name":"Nissan 26550NDS00", "description":"Lamp Development and Validation Test Procedures - Rear Lamp", "normType":"Automobil Standards" } , { "id":"905", "name":"PSA B25 7110", "description":"Normes v\u00e9hicules", "normType":"Automobil Standards" } , { "id":"906", "name":"PSA PEUGEOT CITRO\u00cbN", "description":"", "normType":"Automobil Standards" } , { "id":"907", "name":"Renault 32-09-827", "description":"Au\u00dfenspiegel elektrisch verstellbar", "normType":"Automobil Standards" } , { "id":"908", "name":"Renault 36-00-801", "description":"Verification des protections sur materials electriques contre la projection d\u00b4eau", "normType":"Automobil Standards" } , { "id":"912", "name":"SAW-Norm 67 007-03", "description":"Schutz gegen Spritzwasser - IPX4K", "normType":"Automobil Standards" } , { "id":"915", "name":"Toyota TSC3000G", "description":"Grundlegende Umweltpr\u00fcfverfahren, Pr\u00fcfgruppe L, Staub und Sand, Pr\u00fcfung Lb: Einwirkung von Staub bei freier Sedimentation", "normType":"Automobil Standards" } , { "id":"923", "name":"VDA AK 1.4.2", "description":"Qualification Test for E-fan with EC\/DC drive motor", "normType":"Automobil Standards" } , { "id":"927", "name":"Volkswagen 80000", "description":"Electric and Electronic Components in Motor Vehicles up to 3,5 t - General Requirements, Test Conditions and Tests", "normType":"Automobil Standards" } , { "id":"934", "name":"Volkswagen TL909", "description":"Headlights Europe\/USA - Functional Requirements", "normType":"Automobil Standards" } , { "id":"940", "name":"VTL 1600-001", "description":"Luftfahrt-Bordger\u00e4te", "normType":"Automobil Standards" } ] } , { "name":"C\/1500\/40\/x", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"32", "norms": [ { "id":"738", "name":"BMW GS 95011-4", "description":"Electronic devices in motor vehicles - Dewing test and climate test", "normType":"Automobil Standards" } , { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"740", "name":"BMW PR 306.5 (without IR system)", "description":"Solar Simulation Interior Parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"797", "name":"GB\/T 2423.2", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests B: Dry heat", "normType":"Standards Hot" } , { "id":"798", "name":"GB\/T 2423.3", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"799", "name":"GB\/T 2423.50", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests Cy: Damp heat steady state accelerated test primarily intended for components.", "normType":"Constant Climate" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"838", "name":"ISO 16750-4, Hum heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"860", "name":"JJF1101", "description":"calibration Specification for the Equipment of the Environment testing for temperature and humidity", "normType":"Calibration standard" } , { "id":"865", "name":"MIL-E-5272, Part 4.4", "description":"Environmental testing, Aeronautical and associated equipment, General Specification for", "normType":"Climate Change" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"918", "name":"UL 1703 (test 33 temperature cycling test, test 34 humidity test)", "description":"Standard for Flat-Plate Photovoltaic Modules and Panels", "normType":"special test standard" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"927", "name":"Volkswagen 80000", "description":"Electric and Electronic Components in Motor Vehicles up to 3,5 t - General Requirements, Test Conditions and Tests", "normType":"Automobil Standards" } , { "id":"930", "name":"Volkswagen PV 1210 ", "description":"Vehicle Parts - Testing of Resistance to Environmental Cycle Test (+80\/-40) \u00b0C", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } ] } , { "name":"C\/180\/40\/x", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"10", "norms": [ { "id":"738", "name":"BMW GS 95011-4", "description":"Electronic devices in motor vehicles - Dewing test and climate test", "normType":"Automobil Standards" } , { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"740", "name":"BMW PR 306.5 (without IR system)", "description":"Solar Simulation Interior Parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"797", "name":"GB\/T 2423.2", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests B: Dry heat", "normType":"Standards Hot" } , { "id":"798", "name":"GB\/T 2423.3", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"799", "name":"GB\/T 2423.50", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests Cy: Damp heat steady state accelerated test primarily intended for components.", "normType":"Constant Climate" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"838", "name":"ISO 16750-4, Hum heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"860", "name":"JJF1101", "description":"calibration Specification for the Equipment of the Environment testing for temperature and humidity", "normType":"Calibration standard" } , { "id":"865", "name":"MIL-E-5272, Part 4.4", "description":"Environmental testing, Aeronautical and associated equipment, General Specification for", "normType":"Climate Change" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"918", "name":"UL 1703 (test 33 temperature cycling test, test 34 humidity test)", "description":"Standard for Flat-Plate Photovoltaic Modules and Panels", "normType":"special test standard" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"927", "name":"Volkswagen 80000", "description":"Electric and Electronic Components in Motor Vehicles up to 3,5 t - General Requirements, Test Conditions and Tests", "normType":"Automobil Standards" } , { "id":"930", "name":"Volkswagen PV 1210 ", "description":"Vehicle Parts - Testing of Resistance to Environmental Cycle Test (+80\/-40) \u00b0C", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } ] } , { "name":"C\/180\/70\/x", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"26", "norms": [ { "id":"738", "name":"BMW GS 95011-4", "description":"Electronic devices in motor vehicles - Dewing test and climate test", "normType":"Automobil Standards" } , { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"740", "name":"BMW PR 306.5 (without IR system)", "description":"Solar Simulation Interior Parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"797", "name":"GB\/T 2423.2", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests B: Dry heat", "normType":"Standards Hot" } , { "id":"798", "name":"GB\/T 2423.3", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"799", "name":"GB\/T 2423.50", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests Cy: Damp heat steady state accelerated test primarily intended for components.", "normType":"Constant Climate" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"838", "name":"ISO 16750-4, Hum heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"860", "name":"JJF1101", "description":"calibration Specification for the Equipment of the Environment testing for temperature and humidity", "normType":"Calibration standard" } , { "id":"865", "name":"MIL-E-5272, Part 4.4", "description":"Environmental testing, Aeronautical and associated equipment, General Specification for", "normType":"Climate Change" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"918", "name":"UL 1703 (test 33 temperature cycling test, test 34 humidity test)", "description":"Standard for Flat-Plate Photovoltaic Modules and Panels", "normType":"special test standard" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"927", "name":"Volkswagen 80000", "description":"Electric and Electronic Components in Motor Vehicles up to 3,5 t - General Requirements, Test Conditions and Tests", "normType":"Automobil Standards" } , { "id":"930", "name":"Volkswagen PV 1210 ", "description":"Vehicle Parts - Testing of Resistance to Environmental Cycle Test (+80\/-40) \u00b0C", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } ] } , { "name":"C\/380\/40\/x", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"29", "norms": [ { "id":"738", "name":"BMW GS 95011-4", "description":"Electronic devices in motor vehicles - Dewing test and climate test", "normType":"Automobil Standards" } , { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"740", "name":"BMW PR 306.5 (without IR system)", "description":"Solar Simulation Interior Parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"797", "name":"GB\/T 2423.2", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests B: Dry heat", "normType":"Standards Hot" } , { "id":"798", "name":"GB\/T 2423.3", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"799", "name":"GB\/T 2423.50", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests Cy: Damp heat steady state accelerated test primarily intended for components.", "normType":"Constant Climate" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"838", "name":"ISO 16750-4, Hum heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"860", "name":"JJF1101", "description":"calibration Specification for the Equipment of the Environment testing for temperature and humidity", "normType":"Calibration standard" } , { "id":"865", "name":"MIL-E-5272, Part 4.4", "description":"Environmental testing, Aeronautical and associated equipment, General Specification for", "normType":"Climate Change" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"918", "name":"UL 1703 (test 33 temperature cycling test, test 34 humidity test)", "description":"Standard for Flat-Plate Photovoltaic Modules and Panels", "normType":"special test standard" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"927", "name":"Volkswagen 80000", "description":"Electric and Electronic Components in Motor Vehicles up to 3,5 t - General Requirements, Test Conditions and Tests", "normType":"Automobil Standards" } , { "id":"930", "name":"Volkswagen PV 1210 ", "description":"Vehicle Parts - Testing of Resistance to Environmental Cycle Test (+80\/-40) \u00b0C", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } ] } , { "name":"C\/380\/70\/x", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"40", "norms": [ { "id":"738", "name":"BMW GS 95011-4", "description":"Electronic devices in motor vehicles - Dewing test and climate test", "normType":"Automobil Standards" } , { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"740", "name":"BMW PR 306.5 (without IR system)", "description":"Solar Simulation Interior Parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"797", "name":"GB\/T 2423.2", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests B: Dry heat", "normType":"Standards Hot" } , { "id":"798", "name":"GB\/T 2423.3", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"799", "name":"GB\/T 2423.50", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests Cy: Damp heat steady state accelerated test primarily intended for components.", "normType":"Constant Climate" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"838", "name":"ISO 16750-4, Hum heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"860", "name":"JJF1101", "description":"calibration Specification for the Equipment of the Environment testing for temperature and humidity", "normType":"Calibration standard" } , { "id":"865", "name":"MIL-E-5272, Part 4.4", "description":"Environmental testing, Aeronautical and associated equipment, General Specification for", "normType":"Climate Change" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"918", "name":"UL 1703 (test 33 temperature cycling test, test 34 humidity test)", "description":"Standard for Flat-Plate Photovoltaic Modules and Panels", "normType":"special test standard" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"927", "name":"Volkswagen 80000", "description":"Electric and Electronic Components in Motor Vehicles up to 3,5 t - General Requirements, Test Conditions and Tests", "normType":"Automobil Standards" } , { "id":"930", "name":"Volkswagen PV 1210 ", "description":"Vehicle Parts - Testing of Resistance to Environmental Cycle Test (+80\/-40) \u00b0C", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } ] } , { "name":"C\/600\/40\/x", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"19", "norms": [ { "id":"738", "name":"BMW GS 95011-4", "description":"Electronic devices in motor vehicles - Dewing test and climate test", "normType":"Automobil Standards" } , { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"740", "name":"BMW PR 306.5 (without IR system)", "description":"Solar Simulation Interior Parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"797", "name":"GB\/T 2423.2", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests B: Dry heat", "normType":"Standards Hot" } , { "id":"798", "name":"GB\/T 2423.3", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"799", "name":"GB\/T 2423.50", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests Cy: Damp heat steady state accelerated test primarily intended for components.", "normType":"Constant Climate" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"838", "name":"ISO 16750-4, Hum heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"860", "name":"JJF1101", "description":"calibration Specification for the Equipment of the Environment testing for temperature and humidity", "normType":"Calibration standard" } , { "id":"865", "name":"MIL-E-5272, Part 4.4", "description":"Environmental testing, Aeronautical and associated equipment, General Specification for", "normType":"Climate Change" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"918", "name":"UL 1703 (test 33 temperature cycling test, test 34 humidity test)", "description":"Standard for Flat-Plate Photovoltaic Modules and Panels", "normType":"special test standard" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"927", "name":"Volkswagen 80000", "description":"Electric and Electronic Components in Motor Vehicles up to 3,5 t - General Requirements, Test Conditions and Tests", "normType":"Automobil Standards" } , { "id":"930", "name":"Volkswagen PV 1210 ", "description":"Vehicle Parts - Testing of Resistance to Environmental Cycle Test (+80\/-40) \u00b0C", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } ] } , { "name":"C\/600\/70\/x", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"23", "norms": [ { "id":"738", "name":"BMW GS 95011-4", "description":"Electronic devices in motor vehicles - Dewing test and climate test", "normType":"Automobil Standards" } , { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"740", "name":"BMW PR 306.5 (without IR system)", "description":"Solar Simulation Interior Parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"797", "name":"GB\/T 2423.2", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests B: Dry heat", "normType":"Standards Hot" } , { "id":"798", "name":"GB\/T 2423.3", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"799", "name":"GB\/T 2423.50", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests Cy: Damp heat steady state accelerated test primarily intended for components.", "normType":"Constant Climate" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"838", "name":"ISO 16750-4, Hum heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"860", "name":"JJF1101", "description":"calibration Specification for the Equipment of the Environment testing for temperature and humidity", "normType":"Calibration standard" } , { "id":"865", "name":"MIL-E-5272, Part 4.4", "description":"Environmental testing, Aeronautical and associated equipment, General Specification for", "normType":"Climate Change" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"918", "name":"UL 1703 (test 33 temperature cycling test, test 34 humidity test)", "description":"Standard for Flat-Plate Photovoltaic Modules and Panels", "normType":"special test standard" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"927", "name":"Volkswagen 80000", "description":"Electric and Electronic Components in Motor Vehicles up to 3,5 t - General Requirements, Test Conditions and Tests", "normType":"Automobil Standards" } , { "id":"930", "name":"Volkswagen PV 1210 ", "description":"Vehicle Parts - Testing of Resistance to Environmental Cycle Test (+80\/-40) \u00b0C", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } ] } , { "name":"C\/1000\/40\/x", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"0", "norms": [ { "id":"738", "name":"BMW GS 95011-4", "description":"Electronic devices in motor vehicles - Dewing test and climate test", "normType":"Automobil Standards" } , { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"740", "name":"BMW PR 306.5 (without IR system)", "description":"Solar Simulation Interior Parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"797", "name":"GB\/T 2423.2", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests B: Dry heat", "normType":"Standards Hot" } , { "id":"798", "name":"GB\/T 2423.3", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"799", "name":"GB\/T 2423.50", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests Cy: Damp heat steady state accelerated test primarily intended for components.", "normType":"Constant Climate" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"838", "name":"ISO 16750-4, Hum heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"860", "name":"JJF1101", "description":"calibration Specification for the Equipment of the Environment testing for temperature and humidity", "normType":"Calibration standard" } , { "id":"865", "name":"MIL-E-5272, Part 4.4", "description":"Environmental testing, Aeronautical and associated equipment, General Specification for", "normType":"Climate Change" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"918", "name":"UL 1703 (test 33 temperature cycling test, test 34 humidity test)", "description":"Standard for Flat-Plate Photovoltaic Modules and Panels", "normType":"special test standard" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"927", "name":"Volkswagen 80000", "description":"Electric and Electronic Components in Motor Vehicles up to 3,5 t - General Requirements, Test Conditions and Tests", "normType":"Automobil Standards" } , { "id":"930", "name":"Volkswagen PV 1210 ", "description":"Vehicle Parts - Testing of Resistance to Environmental Cycle Test (+80\/-40) \u00b0C", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } ] } , { "name":"C\/1000\/70\/x", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"41", "norms": [ { "id":"738", "name":"BMW GS 95011-4", "description":"Electronic devices in motor vehicles - Dewing test and climate test", "normType":"Automobil Standards" } , { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"740", "name":"BMW PR 306.5 (without IR system)", "description":"Solar Simulation Interior Parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"797", "name":"GB\/T 2423.2", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests B: Dry heat", "normType":"Standards Hot" } , { "id":"798", "name":"GB\/T 2423.3", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"799", "name":"GB\/T 2423.50", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests Cy: Damp heat steady state accelerated test primarily intended for components.", "normType":"Constant Climate" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"838", "name":"ISO 16750-4, Hum heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"860", "name":"JJF1101", "description":"calibration Specification for the Equipment of the Environment testing for temperature and humidity", "normType":"Calibration standard" } , { "id":"865", "name":"MIL-E-5272, Part 4.4", "description":"Environmental testing, Aeronautical and associated equipment, General Specification for", "normType":"Climate Change" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"918", "name":"UL 1703 (test 33 temperature cycling test, test 34 humidity test)", "description":"Standard for Flat-Plate Photovoltaic Modules and Panels", "normType":"special test standard" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"927", "name":"Volkswagen 80000", "description":"Electric and Electronic Components in Motor Vehicles up to 3,5 t - General Requirements, Test Conditions and Tests", "normType":"Automobil Standards" } , { "id":"930", "name":"Volkswagen PV 1210 ", "description":"Vehicle Parts - Testing of Resistance to Environmental Cycle Test (+80\/-40) \u00b0C", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } ] } , { "name":"C\/1500\/70\/x", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"4", "norms": [ { "id":"738", "name":"BMW GS 95011-4", "description":"Electronic devices in motor vehicles - Dewing test and climate test", "normType":"Automobil Standards" } , { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"740", "name":"BMW PR 306.5 (without IR system)", "description":"Solar Simulation Interior Parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"797", "name":"GB\/T 2423.2", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests B: Dry heat", "normType":"Standards Hot" } , { "id":"798", "name":"GB\/T 2423.3", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"799", "name":"GB\/T 2423.50", "description":"Environmental testing for electric and electronic products - Part 2: Testsmethod - Tests Cy: Damp heat steady state accelerated test primarily intended for components.", "normType":"Constant Climate" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"838", "name":"ISO 16750-4, Hum heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"860", "name":"JJF1101", "description":"calibration Specification for the Equipment of the Environment testing for temperature and humidity", "normType":"Calibration standard" } , { "id":"865", "name":"MIL-E-5272, Part 4.4", "description":"Environmental testing, Aeronautical and associated equipment, General Specification for", "normType":"Climate Change" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"918", "name":"UL 1703 (test 33 temperature cycling test, test 34 humidity test)", "description":"Standard for Flat-Plate Photovoltaic Modules and Panels", "normType":"special test standard" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"927", "name":"Volkswagen 80000", "description":"Electric and Electronic Components in Motor Vehicles up to 3,5 t - General Requirements, Test Conditions and Tests", "normType":"Automobil Standards" } , { "id":"930", "name":"Volkswagen PV 1210 ", "description":"Vehicle Parts - Testing of Resistance to Environmental Cycle Test (+80\/-40) \u00b0C", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } ] } , { "name":"WK3-1600\/40\/3 H", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"25", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } ] } , { "name":"WK3-1600\/40\/5 H", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"34", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } ] } , { "name":"WK3-2450\/40\/2 H", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"27", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } ] } , { "name":"WK3-2450\/40\/3 H", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"7", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } ] } , { "name":"WK3-3100\/40\/2 H", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"18", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } ] } , { "name":"WK3-1600\/70\/3 H", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"0", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"832", "name":"IEC 61646, Tests 10.11, 10.12 und 10.13", "description":"Thin-film terrestrial photovoltaic (PV) Modules - Design qualification and type approval", "normType":"Climate Change" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } ] } , { "name":"WK3-1600\/70\/5 H", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"33", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"832", "name":"IEC 61646, Tests 10.11, 10.12 und 10.13", "description":"Thin-film terrestrial photovoltaic (PV) Modules - Design qualification and type approval", "normType":"Climate Change" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } ] } , { "name":"WK3-2450\/70\/2 H", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"41", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"832", "name":"IEC 61646, Tests 10.11, 10.12 und 10.13", "description":"Thin-film terrestrial photovoltaic (PV) Modules - Design qualification and type approval", "normType":"Climate Change" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } ] } , { "name":"WK3-2450\/70\/3 H", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"23", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"832", "name":"IEC 61646, Tests 10.11, 10.12 und 10.13", "description":"Thin-film terrestrial photovoltaic (PV) Modules - Design qualification and type approval", "normType":"Climate Change" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } ] } , { "name":"WK3-3100\/70\/ 2H", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"41", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"832", "name":"IEC 61646, Tests 10.11, 10.12 und 10.13", "description":"Thin-film terrestrial photovoltaic (PV) Modules - Design qualification and type approval", "normType":"Climate Change" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } ] } , { "name":"VCS\u00b3 4160-3 H", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"37", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } ] } , { "name":"VCS\u00b3 4160-5 H", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"12", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } ] } , { "name":"VCS\u00b3 4245-2 H", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"38", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } ] } , { "name":"VCS\u00b3 4245-3 H", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"17", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } ] } , { "name":"VCS\u00b3 4310-2 H", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"9", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } ] } , { "name":"VCS\u00b3 7160-3 H", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"27", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"832", "name":"IEC 61646, Tests 10.11, 10.12 und 10.13", "description":"Thin-film terrestrial photovoltaic (PV) Modules - Design qualification and type approval", "normType":"Climate Change" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } ] } , { "name":"VCS\u00b3 7160-5 H", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"2", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"832", "name":"IEC 61646, Tests 10.11, 10.12 und 10.13", "description":"Thin-film terrestrial photovoltaic (PV) Modules - Design qualification and type approval", "normType":"Climate Change" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } ] } , { "name":"VCS\u00b3 7245-2 H", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"25", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"832", "name":"IEC 61646, Tests 10.11, 10.12 und 10.13", "description":"Thin-film terrestrial photovoltaic (PV) Modules - Design qualification and type approval", "normType":"Climate Change" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } ] } , { "name":"VCS\u00b3 7245-3 H", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"41", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"832", "name":"IEC 61646, Tests 10.11, 10.12 und 10.13", "description":"Thin-film terrestrial photovoltaic (PV) Modules - Design qualification and type approval", "normType":"Climate Change" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } ] } , { "name":"VCS\u00b3 7310-2 H", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"36", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"832", "name":"IEC 61646, Tests 10.11, 10.12 und 10.13", "description":"Thin-film terrestrial photovoltaic (PV) Modules - Design qualification and type approval", "normType":"Climate Change" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } ] } , { "name":"WK3-2500\/40-B", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"0", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } ] } , { "name":"WK3-2500\/40-3-B", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"26", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } ] } , { "name":"WK3-2500\/70-B", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"35", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"832", "name":"IEC 61646, Tests 10.11, 10.12 und 10.13", "description":"Thin-film terrestrial photovoltaic (PV) Modules - Design qualification and type approval", "normType":"Climate Change" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } ] } , { "name":"WK3-2500\/70-3-B", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"13", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"832", "name":"IEC 61646, Tests 10.11, 10.12 und 10.13", "description":"Thin-film terrestrial photovoltaic (PV) Modules - Design qualification and type approval", "normType":"Climate Change" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } ] } , { "name":"WK3-3400\/70-B", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"13", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"832", "name":"IEC 61646, Tests 10.11, 10.12 und 10.13", "description":"Thin-film terrestrial photovoltaic (PV) Modules - Design qualification and type approval", "normType":"Climate Change" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } ] } , { "name":"WK3-3400\/70-3-B", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"42", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"832", "name":"IEC 61646, Tests 10.11, 10.12 und 10.13", "description":"Thin-film terrestrial photovoltaic (PV) Modules - Design qualification and type approval", "normType":"Climate Change" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } ] } , { "name":"VC\u00b3 4250", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"0", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } ] } , { "name":"VCS\u00b3 4250", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"4", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } ] } , { "name":"VC\u00b3 7250", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"5", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"832", "name":"IEC 61646, Tests 10.11, 10.12 und 10.13", "description":"Thin-film terrestrial photovoltaic (PV) Modules - Design qualification and type approval", "normType":"Climate Change" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } ] } , { "name":"VCS\u00b3 7250", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"39", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"832", "name":"IEC 61646, Tests 10.11, 10.12 und 10.13", "description":"Thin-film terrestrial photovoltaic (PV) Modules - Design qualification and type approval", "normType":"Climate Change" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } ] } , { "name":"VC\u00b3 7340", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"3", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"832", "name":"IEC 61646, Tests 10.11, 10.12 und 10.13", "description":"Thin-film terrestrial photovoltaic (PV) Modules - Design qualification and type approval", "normType":"Climate Change" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } ] } , { "name":"VCS\u00b3 7340", "deviceName":"ClimeEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/klimapruefschraenke-typ-climeevent", "randomNumber":"9", "norms": [ { "id":"739", "name":"BMW PR 303.5", "description":"Alternating climate test for trim parts", "normType":"Automobil Standards" } , { "id":"741", "name":"BMW PR 308.2", "description":"Climatic test for bonded joints and composite materials on trim parts", "normType":"Automobil Standards" } , { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"831", "name":"IEC 61215, Tests 10.11, 10.12 und 10.13", "description":"Crystalline silicon terrestrial photovoltaic (PV) modules \u2013 Design qualification and type approval ", "normType":"Climate Change" } , { "id":"832", "name":"IEC 61646, Tests 10.11, 10.12 und 10.13", "description":"Thin-film terrestrial photovoltaic (PV) Modules - Design qualification and type approval", "normType":"Climate Change" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"870", "name":"MIL-STD-202 H, Method 106H", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } , { "id":"928", "name":"Volkswagen PV 1200", "description":"Pr\u00fcfung der Klimawechselfestigkeit", "normType":"Automobil Standards" } , { "id":"931", "name":"Volkswagen PV 2005", "description":"Testing of Resistance to Environmental Cycle Test", "normType":"Automobil Standards" } ] } , { "name":"ST 600", "deviceName":"DustEvent", "category":"Dust & Water", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/staubtest-typ-st", "randomNumber":"11", "norms": [ { "id":"752", "name":"DIN 40046 T47", "description":"Grundlegende Umweltpr\u00fcfverfahren, Pr\u00fcfgruppe L, Staub und Sand, Pr\u00fcfung Lb: Einwirkung von Staub bei freier Sedimentation", "normType":"International Testing Standards" } , { "id":"753", "name":"DIN 40046 T48", "description":"Grundlegende Umweltpr\u00fcfverfahren, Pr\u00fcfgruppe L, Staub und Sand, Pr\u00fcfung Lc: Einwirkung von Staub bei horizontaler Str\u00f6mungsrichtung", "normType":"International Testing Standards" } , { "id":"755", "name":"DIN 40050 T9", "description":"IP-Schutzarten, Schutz gegen Fremdk\u00f6rper, Wasser und Ber\u00fchren - Elektrische Ausr\u00fcstung", "normType":"International Testing Standards" } , { "id":"768", "name":"DIN EN 60068-2-18", "description":"", "normType":"International Testing Standards" } , { "id":"781", "name":"DIN IEC 50 B (CO) 266", "description":"", "normType":"International Testing Standards" } , { "id":"782", "name":"DIN IEC 60068-1", "description":"Grundlegende Umweltpr\u00fcfverfahren - Teil 1: Allgemeines", "normType":"International Testing Standards" } , { "id":"785", "name":"EIA-364-91", "description":"Dust Test for electrical connectors and sockets", "normType":"International Testing Standards" } , { "id":"795", "name":"FMVSS108", "description":"Lamp, Reflective Devices and Associated Equipment", "normType":"International Testing Standards" } , { "id":"815", "name":"IEC 60068-1", "description":"Environmental testing - Part 1: General and guidance (page 12 ff)", "normType":"International Testing Standards" } , { "id":"828", "name":"IEC 60068-2-68", "description":"Environmental testing. Test methods. Test L. Dust and sand", "normType":"International Testing Standards" } , { "id":"833", "name":"ISO 12 103-1", "description":"Road vehicles - Test dust for filter evaluation - Part 1: Arizona test dust", "normType":"International Testing Standards" } , { "id":"843", "name":"ISO 20 653", "description":"Road vehicles - Degrees of protection (IP-Code) -Protection of electrical equipment against foreign objects, water and access", "normType":"International Testing Standards" } , { "id":"856", "name":"JIS D 0207", "description":"General rules of dust test for automobile parts", "normType":"International Testing Standards" } , { "id":"858", "name":"JIS Z 8813", "description":"Measuring methods for suspended particulate matter concentration in air-general requirements", "normType":"International Testing Standards" } , { "id":"859", "name":"JIS Z 8901", "description":"Test powders and testparticles", "normType":"International Testing Standards" } , { "id":"863", "name":"MIL-E 5272C", "description":"Environmental testing, Aeronautical and associated equipment, General Specification for", "normType":"Additional Dust & Water Testing Standards" } , { "id":"868", "name":"MIL-STD-202 H", "description":"Electronic and electrical component parts", "normType":"Additional Dust & Water Testing Standards" } , { "id":"876", "name":"MIL-STD-331 C", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"884", "name":"MIL-STD-810 B, Method 510", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"885", "name":"MIL-STD-810 C, Method 506.1", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"886", "name":"MIL-STD-810 D, Method 506.2", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"889", "name":"MIL-STD-810 F, Method 510.4", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } , { "id":"895", "name":"MIL-STD-810 G, Method 510", "description":"Environmental engineering considerations and laboratory tests", "normType":"Additional Dust & Water Testing Standards" } ] } , { "name":"WKL 34\/40", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"14", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"\u0000", "deviceName":"", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail?tx_ccportfolioselektorweiss_portfolioselektorweiss%5Baction%5D=show&tx_ccportfolioselektorweiss_portfolioselektorweiss%5Bcontroller%5D=Produkt&cHash=2e19b2a2d751bb583b71d2b4e96fcbe3", "randomNumber":"21", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"787", "name":"LabEvent Clima", "description":"Yes", "normType":"" } , { "id":"788", "name":"LabEvent Temperatur", "description":"Yes", "normType":"" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"838", "name":"ISO 16750-4, Hum heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WTL 34\/40", "deviceName":"LabEvent Temperatur", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"1", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WKL 34\/70", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"8", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WTL 34\/70", "deviceName":"LabEvent Temperatur", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"11", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WKL 64\/40", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"13", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WKL 64\/70", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"21", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WTL 64\/70", "deviceName":"LabEvent Temperatur", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"14", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WKL 100\/40", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"14", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"838", "name":"ISO 16750-4, Hum heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WTL 100\/40", "deviceName":"LabEvent Temperatur", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"17", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WKL 100\/70", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"9", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"838", "name":"ISO 16750-4, Hum heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WTL 100\/70", "deviceName":"LabEvent Temperatur", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"6", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VCL 4003", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"21", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VTL 34\/40", "deviceName":"LabEvent Temperatur", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"15", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VCL 7003", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"5", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VTL 7003", "deviceName":"LabEvent Temperatur", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"2", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VCL 4006", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"6", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VCL 7006", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"24", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VTL 7006", "deviceName":"LabEvent Temperatur", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"9", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VCL 4010", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"4", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"838", "name":"ISO 16750-4, Hum heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VTL 4010", "deviceName":"LabEvent Temperatur", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"10", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VCL 7010", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"11", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"838", "name":"ISO 16750-4, Hum heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VTL 7010", "deviceName":"LabEvent Temperatur", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"15", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L C\/34\/70\/5", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"19", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L T\/34\/70\/5", "deviceName":"LabEvent Temperatur", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"13", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L C\/64\/40\/3", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"5", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L T\/64\/40\/3", "deviceName":"LabEvent Temperatur", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"3", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L C\/64\/70\/3", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"0", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L T\/64\/70\/3", "deviceName":"LabEvent Temperatur", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"20", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L C\/100\/40\/5", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"4", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"838", "name":"ISO 16750-4, Hum heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L T\/100\/40\/5", "deviceName":"LabEvent Temperatur", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"17", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L C\/100\/70\/3", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"17", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"838", "name":"ISO 16750-4, Hum heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L T\/100\/70\/3", "deviceName":"LabEvent Temperatur", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"5", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L T\/150\/40\/5", "deviceName":"LabEvent Temperatur", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"1", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L C\/150\/70\/3", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"0", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"838", "name":"ISO 16750-4, Hum heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L T\/150\/70\/3", "deviceName":"LabEvent Temperatur", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"8", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L C\/100\/70\/10", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"23", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"838", "name":"ISO 16750-4, Hum heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L T\/100\/70\/10", "deviceName":"LabEvent Temperatur", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"17", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L T\/150\/70\/10", "deviceName":"LabEvent Temperatur", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"3", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L C\/150\/70\/10", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"31", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"838", "name":"ISO 16750-4, Hum heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"871", "name":"MIL-STD-202 H, Method 106G", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"882", "name":"MIL-STD-750 F, 1 ", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WT3-1600\/40\/3 H", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"3", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WT3-1600\/40\/5 H", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"15", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WT3-2450\/40\/2 H", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"8", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WT3-2450\/40\/3 H", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"14", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WT3-3100\/40\/2 H", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"1", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WT3-1600\/70\/3 H", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"12", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WT3-1600\/70\/5 H", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"4", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WT3-2450\/70\/2 H", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"6", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WT3-2450\/70\/3 H", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"5", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WT3-3100\/70\/ 2H", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"12", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VTS\u00b3 4160-3 H", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"15", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VTS\u00b3 4160-5 H", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"5", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VTS\u00b3 4245-2 H", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"2", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VTS\u00b3 4245-3 H", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"5", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VTS\u00b3 4310-2 H", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"7", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VTS\u00b3 7160-3 H", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"10", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VTS\u00b3 7160-5 H", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"2", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VTS\u00b3 7245-2 H", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"11", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VTS\u00b3 7245-3 H", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"3", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VTS\u00b3 7310-2 H", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"18", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WT3-2500\/40-B", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"1", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WT3-2500\/40-3-B", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"5", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WT3-3400\/40-B", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"15", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WT3-3400\/40-3-B", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"14", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WT3-2500\/70-B", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"14", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WT3-2500\/70-3-B", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"14", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WT3-3400\/70-B", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"18", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VTS\u00b3-4250-B", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"11", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VT\u00b3-4340-B", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"12", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VTS\u00b3-4340-B", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"4", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VT\u00b3-7250-B", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"5", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VTS\u00b3-7250-B", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"16", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VT\u00b3-7340-B", "deviceName":"TempEvent", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturpruefschraenke-typ-tempevent", "randomNumber":"4", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"878", "name":"MIL-STD-331 C, Test C, 6.2.1.2", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Cold" } , { "id":"879", "name":"MIL-STD-331 C, Test C, 6.2.1.3", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"891", "name":"MIL-STD-810 G, Method 502.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"ShakeEvent Temperatur", "deviceName":"ShakeEvent", "category":"Vibration", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/pruefschraenke-fuer-kombinierte-pruefungen-mit-vibration-typ-shakeevent", "randomNumber":"0", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"853", "name":"JESD22-A105C", "description":"Power and Temperature Cycling", "normType":"Temperature Change" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"864", "name":"MIL-E-5272, Part 4.2", "description":"Environmental testing, Aeronautical and associated equipment, General Specification for", "normType":"Standards Cold" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"890", "name":"MIL-STD-810 G", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"ShakeEvent Clima", "deviceName":"ShakeEvent", "category":"Vibration", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/pruefschraenke-fuer-kombinierte-pruefungen-mit-vibration-typ-shakeevent", "randomNumber":"16", "norms": [ { "id":"786", "name":"ETSI EN 300019-2-4, Test Ab\/Ad", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"790", "name":"ETSI EN 300019-2-4, Test Cab", "description":"Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"792", "name":"ETSI EN 300019-2-4, Test Db", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Climate Change" } , { "id":"793", "name":"ETSI EN 300019-2-4, Test Nb", "description":"Environmental conditions and environmental tests for telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Temperature Change" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"821", "name":"IEC 60068-2-30, Test Db, Var. 1", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"822", "name":"IEC 60068-2-30, Test Db, Var. 2", "description":"Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle)", "normType":"Climate Change" } , { "id":"823", "name":"IEC 60068-2-38", "description":"Environmental testing\u00a0- Part\u00a02-38: Tests\u00a0- Test Z\/AD: Composite temperature\/humidity cyclic test", "normType":"Climate Change" } , { "id":"824", "name":"IEC 60068-2-4, Test D", "description":"Environmental Testing - Tests - Test D: Accelerated Damp Heat ", "normType":"Climate Change" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"835", "name":"ISO 16750-4, Damp heat cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"839", "name":"ISO 16750-4, Low temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Cold" } , { "id":"840", "name":"ISO 16750-4, Tem\/humid cyclic", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Climate Change" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"842", "name":"ISO 16750-4, Temp.steps", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"853", "name":"JESD22-A105C", "description":"Power and Temperature Cycling", "normType":"Temperature Change" } , { "id":"854", "name":"JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"864", "name":"MIL-E-5272, Part 4.2", "description":"Environmental testing, Aeronautical and associated equipment, General Specification for", "normType":"Standards Cold" } , { "id":"865", "name":"MIL-E-5272, Part 4.4", "description":"Environmental testing, Aeronautical and associated equipment, General Specification for", "normType":"Climate Change" } , { "id":"866", "name":"MIL-STD-202 G, Method 103B", "description":"Electronic and electrical component parts - Humidity (steady state)", "normType":"Constant Climate" } , { "id":"867", "name":"MIL-STD-202 G, Method 108A", "description":"Test Method Standard - METHOD 108, LIFE (AT ELEVATED AMBIENT TEMPERATURE)", "normType":"Standards Hot" } , { "id":"874", "name":"MIL-STD-202, Method 106D", "description":"Electronic and electrical component parts", "normType":"Climate Change" } , { "id":"877", "name":"MIL-STD-331 C, Method 106D", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Climate Change" } , { "id":"880", "name":"MIL-STD-331 C, Test C6", "description":"Fuze and fuze components, environmental and performance tests", "normType":"Temperature Change" } , { "id":"883", "name":"MIL-STD-750-F, 1, Change 3", "description":"Test method standard test methods for semiconductor devices", "normType":"Climate Change" } , { "id":"890", "name":"MIL-STD-810 G", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"894", "name":"MIL-STD-810 G, Method 507.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Climate Change" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } , { "id":"898", "name":"MIL-STD-883 J, Method 1004.7", "description":"Microcircuits", "normType":"Climate Change" } , { "id":"924", "name":"VG 95210, Blatt 7, Meth. 106C", "description":"Method 106C - moisture resistance", "normType":"Climate Change" } ] } , { "name":"WKL 34\/+10", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"3", "norms": [ { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WKL 64\/+10", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"0", "norms": [ { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"WKL 100\/+10", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"4", "norms": [ { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VCL 0003", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"0", "norms": [ { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VCL 0006", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"15", "norms": [ { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"VCL 0010", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"1", "norms": [ { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L C\/34\/+10\/5", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"5", "norms": [ { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L C\/64\/+10\/3", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"10", "norms": [ { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L C\/100\/+10\/5", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"9", "norms": [ { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"L C\/150\/+10\/5", "deviceName":"LabEvent Clima", "category":"Climatic Cabinets", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/laborpruefschraenke-typ-labevent", "randomNumber":"1", "norms": [ { "id":"789", "name":"ETSI EN 300019-2-4, Test Bb\/Bd", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Standards Hot" } , { "id":"791", "name":"ETSI EN 300019-2-4, Test Cb", "description":"Environmental Engineering (EE); Environmental conditions and environmental tests for telecommunications equipment; Part 2-4: Specification of environmental tests; Stationary use at non-weatherprotected locations", "normType":"Constant Climate" } , { "id":"818", "name":"IEC 60068-2-14, Test Nb", "description":"Environmental testing - Part 2-14: Tests - Test N: Change of temperature", "normType":"Temperature Change" } , { "id":"820", "name":"IEC 60068-2-2, Test B", "description":"Environmental testing - Part 2-2: Tests - Test B: Dry heat ", "normType":"Standards Hot" } , { "id":"826", "name":"IEC 60068-2-56", "description":"Damp Heat, Steady State, Primarily for Equipment", "normType":"Constant Climate" } , { "id":"827", "name":"IEC 60068-2-67", "description":"Environmental testing - Part 2: Tests; test Cy: Damp heat, steady state, accelerated test primarily intended for components ", "normType":"Constant Climate" } , { "id":"829", "name":"IEC 60068-2-78", "description":"Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state", "normType":"Constant Climate" } , { "id":"830", "name":"IEC 60721-4 (DIN IEC 721-6 \/ DIN 40046-721-6)", "description":"Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068", "normType":"Standards Cold" } , { "id":"836", "name":"ISO 16750-4, Damp heat steady", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Constant Climate" } , { "id":"837", "name":"ISO 16750-4, High temperature", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Standards Hot" } , { "id":"841", "name":"ISO 16750-4, Temp.cycling", "description":"Road vehicles - Environmental conditions and testing for electrical and electronic equipment - Part 4: Climatic loads", "normType":"Temperature Change" } , { "id":"849", "name":"JESD22-A100D", "description":"Cycled Temperature-Humidity-Bias Life Test", "normType":"Climate Change" } , { "id":"850", "name":"JESD22-A101C", "description":"Steady State Temperature Humidity Bias Life Test", "normType":"Constant Climate" } , { "id":"851", "name":"JESD22-A103C", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"852", "name":"JESD22-A103D", "description":"High Temperature Storage Life", "normType":"Standards Hot" } , { "id":"869", "name":"MIL-STD-202 H, Method 103B", "description":"Electronic and electrical component parts", "normType":"Constant Climate" } , { "id":"873", "name":"MIL-STD-202 H, Method 108A", "description":"Electronic and electrical component parts", "normType":"Standards Hot" } , { "id":"892", "name":"MIL-STD-810 G, Method 501.5", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Hot" } , { "id":"897", "name":"MIL-STD-883 J, Method 1008.2", "description":"Microcircuits", "normType":"Standards Hot" } ] } , { "name":"TKA K1W, K2W, K4W", "deviceName":"TKA", "category":"Defence", "lang":"0", "link":"http:\/\/www.weissdefence.com\/de\/defence\/schunk01.c.79661.de", "randomNumber":"1", "norms": [ { "id":"881", "name":"MIL-STD-461 F", "description":"Electromagnetic interference", "normType":"International Standard" } , { "id":"890", "name":"MIL-STD-810 G", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"914", "name":"TL A-0032", "description":"Labeling of Nato Products", "normType":"International Standard" } , { "id":"925", "name":"VG 95375", "description":"Electromagnetic interference", "normType":"International Standard" } ] } , { "name":"TKA K13W, K15W, K16W", "deviceName":"TKA", "category":"Defence", "lang":"0", "link":"http:\/\/www.weissdefence.com\/de\/defence\/schunk01.c.79661.de", "randomNumber":"0", "norms": [ { "id":"881", "name":"MIL-STD-461 F", "description":"Electromagnetic interference", "normType":"International Standard" } , { "id":"890", "name":"MIL-STD-810 G", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"914", "name":"TL A-0032", "description":"Labeling of Nato Products", "normType":"International Standard" } , { "id":"925", "name":"VG 95375", "description":"Electromagnetic interference", "normType":"International Standard" } ] } , { "name":"TKA K19W-A7, A10, A12", "deviceName":"TKA", "category":"Defence", "lang":"0", "link":"http:\/\/www.weissdefence.com\/de\/defence\/schunk01.c.79661.de", "randomNumber":"2", "norms": [ { "id":"881", "name":"MIL-STD-461 F", "description":"Electromagnetic interference", "normType":"International Standard" } , { "id":"890", "name":"MIL-STD-810 G", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"914", "name":"TL A-0032", "description":"Labeling of Nato Products", "normType":"International Standard" } , { "id":"925", "name":"VG 95375", "description":"Electromagnetic interference", "normType":"International Standard" } ] } , { "name":"TKA K23W ", "deviceName":"TKA", "category":"Defence", "lang":"0", "link":"http:\/\/www.weissdefence.com\/de\/defence\/schunk01.c.79661.de", "randomNumber":"0", "norms": [ { "id":"881", "name":"MIL-STD-461 F", "description":"Electromagnetic interference", "normType":"International Standard" } , { "id":"890", "name":"MIL-STD-810 G", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"914", "name":"TL A-0032", "description":"Labeling of Nato Products", "normType":"International Standard" } , { "id":"925", "name":"VG 95375", "description":"Electromagnetic interference", "normType":"International Standard" } ] } , { "name":"TKA K29W ", "deviceName":"TKA", "category":"Defence", "lang":"0", "link":"http:\/\/www.weissdefence.com\/de\/defence\/schunk01.c.79661.de", "randomNumber":"0", "norms": [ { "id":"881", "name":"MIL-STD-461 F", "description":"Electromagnetic interference", "normType":"International Standard" } , { "id":"890", "name":"MIL-STD-810 G", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"914", "name":"TL A-0032", "description":"Labeling of Nato Products", "normType":"International Standard" } ] } , { "name":"TKA K30W, K31W ", "deviceName":"TKA", "category":"Defence", "lang":"0", "link":"http:\/\/www.weissdefence.com\/de\/defence\/schunk01.c.79661.de", "randomNumber":"1", "norms": [ { "id":"881", "name":"MIL-STD-461 F", "description":"Electromagnetic interference", "normType":"International Standard" } , { "id":"890", "name":"MIL-STD-810 G", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"914", "name":"TL A-0032", "description":"Labeling of Nato Products", "normType":"International Standard" } , { "id":"925", "name":"VG 95375", "description":"Electromagnetic interference", "normType":"International Standard" } ] } , { "name":"TKA HKE 10", "deviceName":"TKA", "category":"Defence", "lang":"0", "link":"http:\/\/www.weissdefence.com\/de\/defence\/schunk01.c.79661.de", "randomNumber":"1", "norms": [ { "id":"881", "name":"MIL-STD-461 F", "description":"Electromagnetic interference", "normType":"International Standard" } , { "id":"890", "name":"MIL-STD-810 G", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"914", "name":"TL A-0032", "description":"Labeling of Nato Products", "normType":"International Standard" } , { "id":"925", "name":"VG 95375", "description":"Electromagnetic interference", "normType":"International Standard" } ] } , { "name":"STA 8-A", "deviceName":"STA", "category":"Defence", "lang":"0", "link":"http:\/\/www.weissdefence.com\/de\/defence\/schunk01.c.79661.de", "randomNumber":"1", "norms": [ { "id":"881", "name":"MIL-STD-461 F", "description":"Electromagnetic interference", "normType":"International Standard" } , { "id":"890", "name":"MIL-STD-810 G", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } ] } , { "name":"ZKB 15\/10 MFA", "deviceName":"ZKB", "category":"Defence", "lang":"0", "link":"http:\/\/www.weissdefence.com\/de\/defence\/schunk01.c.79661.de", "randomNumber":"2", "norms": [ { "id":"881", "name":"MIL-STD-461 F", "description":"Electromagnetic interference", "normType":"International Standard" } , { "id":"890", "name":"MIL-STD-810 G", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"914", "name":"TL A-0032", "description":"Labeling of Nato Products", "normType":"International Standard" } ] } , { "name":"Module R17-T-C", "deviceName":"Module-R", "category":"Defence", "lang":"0", "link":"http:\/\/www.weissdefence.com\/de\/defence\/schunk01.c.79661.de", "randomNumber":"1", "norms": [ { "id":"881", "name":"MIL-STD-461 F", "description":"Electromagnetic interference", "normType":"International Standard" } , { "id":"890", "name":"MIL-STD-810 G", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"914", "name":"TL A-0032", "description":"Labeling of Nato Products", "normType":"International Standard" } ] } , { "name":"TKA K51W-A7, A10, A14 ", "deviceName":"TKA", "category":"Defence", "lang":"0", "link":"http:\/\/www.weissdefence.com\/de\/defence\/schunk01.c.79661.de", "randomNumber":"1", "norms": [ { "id":"890", "name":"MIL-STD-810 G", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"914", "name":"TL A-0032", "description":"Labeling of Nato Products", "normType":"International Standard" } ] } , { "name":"TKA K36W ", "deviceName":"TKA", "category":"Defence", "lang":"0", "link":"http:\/\/www.weissdefence.com\/de\/defence\/schunk01.c.79661.de", "randomNumber":"0", "norms": [ { "id":"890", "name":"MIL-STD-810 G", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"914", "name":"TL A-0032", "description":"Labeling of Nato Products", "normType":"International Standard" } ] } , { "name":"ZKB 20\/18", "deviceName":"ZKB", "category":"Defence", "lang":"0", "link":"http:\/\/www.weissdefence.com\/de\/defence\/schunk01.c.79661.de", "randomNumber":"0", "norms": [ { "id":"890", "name":"MIL-STD-810 G", "description":"Environmental engineering considerations and laboratory tests", "normType":"Standards Cold" } , { "id":"914", "name":"TL A-0032", "description":"Labeling of Nato Products", "normType":"International Standard" } ] } , { "name":"ZKB 15-A10", "deviceName":"ZKB", "category":"Defence", "lang":"0", "link":"http:\/\/www.weissdefence.com\/de\/defence\/schunk01.c.79661.de", "randomNumber":"1", "norms": [ { "id":"914", "name":"TL A-0032", "description":"Labeling of Nato Products", "normType":"International Standard" } , { "id":"925", "name":"VG 95375", "description":"Electromagnetic interference", "normType":"International Standard" } ] } , { "name":"T\/120", "deviceName":"ShockEvent", "category":"TemperatureShock", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturschock-pruefschraenke-shockevent", "randomNumber":"6", "norms": [ { "id":"941", "name":"IEC 60068-2-14, Test Na", "description":"Rapid change of temperature with prescribed time of transition", "normType":"Temperature Shock" } , { "id":"942", "name":"MIL-STD-810 G Methode 503.5", "description":"Air temperature change greater than 10K within one minute", "normType":"Temperature Shock" } , { "id":"943", "name":"MIL-STD-883 K Methode 1011.9, A B C D F", "description":"Microcircuits", "normType":"Temperature Shock" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"944", "name":"JEDEC JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"945", "name":"MIL-STD-810 G, Methode 502.5", "description":"Low Temperature Test", "normType":"Standards Cold" } , { "id":"946", "name":"ETSI EN 300019-2-4, Test Ab \/Ad", "description":"Telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"947", "name":"MIL-STD-202 G Methode 107G, A B C F", "description":"ThermalShock", "normType":"Temperature Shock" } ] } , { "name":"T\/300", "deviceName":"ShockEvent", "category":"TemperatureShock", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturschock-pruefschraenke-shockevent", "randomNumber":"4", "norms": [ { "id":"941", "name":"IEC 60068-2-14, Test Na", "description":"Rapid change of temperature with prescribed time of transition", "normType":"Temperature Shock" } , { "id":"942", "name":"MIL-STD-810 G Methode 503.5", "description":"Air temperature change greater than 10K within one minute", "normType":"Temperature Shock" } , { "id":"943", "name":"MIL-STD-883 K Methode 1011.9, A B C D F", "description":"Microcircuits", "normType":"Temperature Shock" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"944", "name":"JEDEC JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"945", "name":"MIL-STD-810 G, Methode 502.5", "description":"Low Temperature Test", "normType":"Standards Cold" } , { "id":"946", "name":"ETSI EN 300019-2-4, Test Ab \/Ad", "description":"Telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"947", "name":"MIL-STD-202 G Methode 107G, A B C F", "description":"ThermalShock", "normType":"Temperature Shock" } ] } , { "name":"T\/60", "deviceName":"ShockEvent", "category":"TemperatureShock", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturschock-pruefschraenke-shockevent", "randomNumber":"4", "norms": [ { "id":"941", "name":"IEC 60068-2-14, Test Na", "description":"Rapid change of temperature with prescribed time of transition", "normType":"Temperature Shock" } , { "id":"942", "name":"MIL-STD-810 G Methode 503.5", "description":"Air temperature change greater than 10K within one minute", "normType":"Temperature Shock" } , { "id":"943", "name":"MIL-STD-883 K Methode 1011.9, A B C D F", "description":"Microcircuits", "normType":"Temperature Shock" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"944", "name":"JEDEC JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"945", "name":"MIL-STD-810 G, Methode 502.5", "description":"Low Temperature Test", "normType":"Standards Cold" } , { "id":"946", "name":"ETSI EN 300019-2-4, Test Ab \/Ad", "description":"Telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"947", "name":"MIL-STD-202 G Methode 107G, A B C F", "description":"ThermalShock", "normType":"Temperature Shock" } ] } , { "name":"VT\u00b3 7006", "deviceName":"ShockEvent", "category":"TemperatureShock", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturschock-pruefschraenke-shockevent", "randomNumber":"4", "norms": [ { "id":"941", "name":"IEC 60068-2-14, Test Na", "description":"Rapid change of temperature with prescribed time of transition", "normType":"Temperature Shock" } , { "id":"942", "name":"MIL-STD-810 G Methode 503.5", "description":"Air temperature change greater than 10K within one minute", "normType":"Temperature Shock" } , { "id":"943", "name":"MIL-STD-883 K Methode 1011.9, A B C D F", "description":"Microcircuits", "normType":"Temperature Shock" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"944", "name":"JEDEC JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"945", "name":"MIL-STD-810 G, Methode 502.5", "description":"Low Temperature Test", "normType":"Standards Cold" } , { "id":"946", "name":"ETSI EN 300019-2-4, Test Ab \/Ad", "description":"Telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"947", "name":"MIL-STD-202 G Methode 107G, A B C F", "description":"ThermalShock", "normType":"Temperature Shock" } ] } , { "name":"VT\u00b3 7012", "deviceName":"ShockEvent", "category":"TemperatureShock", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturschock-pruefschraenke-shockevent", "randomNumber":"5", "norms": [ { "id":"941", "name":"IEC 60068-2-14, Test Na", "description":"Rapid change of temperature with prescribed time of transition", "normType":"Temperature Shock" } , { "id":"942", "name":"MIL-STD-810 G Methode 503.5", "description":"Air temperature change greater than 10K within one minute", "normType":"Temperature Shock" } , { "id":"943", "name":"MIL-STD-883 K Methode 1011.9, A B C D F", "description":"Microcircuits", "normType":"Temperature Shock" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"944", "name":"JEDEC JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"945", "name":"MIL-STD-810 G, Methode 502.5", "description":"Low Temperature Test", "normType":"Standards Cold" } , { "id":"946", "name":"ETSI EN 300019-2-4, Test Ab \/Ad", "description":"Telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"947", "name":"MIL-STD-202 G Methode 107G, A B C F", "description":"ThermalShock", "normType":"Temperature Shock" } ] } , { "name":"VT\u00b3 7030", "deviceName":"ShockEvent", "category":"TemperatureShock", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/temperaturschock-pruefschraenke-shockevent", "randomNumber":"0", "norms": [ { "id":"941", "name":"IEC 60068-2-14, Test Na", "description":"Rapid change of temperature with prescribed time of transition", "normType":"Temperature Shock" } , { "id":"942", "name":"MIL-STD-810 G Methode 503.5", "description":"Air temperature change greater than 10K within one minute", "normType":"Temperature Shock" } , { "id":"943", "name":"MIL-STD-883 K Methode 1011.9, A B C D F", "description":"Microcircuits", "normType":"Temperature Shock" } , { "id":"816", "name":"IEC 60068-2-1, Test A", "description":"Environmental testing - Part 2-1: Tests - Tests A: Cold ", "normType":"Standards Cold" } , { "id":"944", "name":"JEDEC JESD22-A119", "description":"Low Temperature Storage Life", "normType":"Standards Cold" } , { "id":"945", "name":"MIL-STD-810 G, Methode 502.5", "description":"Low Temperature Test", "normType":"Standards Cold" } , { "id":"946", "name":"ETSI EN 300019-2-4, Test Ab \/Ad", "description":"Telecommunications equipment, Stationary use at non-weatherprotected locations", "normType":"Standards Cold" } , { "id":"947", "name":"MIL-STD-202 G Methode 107G, A B C F", "description":"ThermalShock", "normType":"Temperature Shock" } ] } , { "name":"VOC 1000", "deviceName":"EmissionEvent", "category":"Emission", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/emissionevent-typ-voc-1000", "randomNumber":"0", "norms": [ { "id":"948", "name":"DIN ISO 16000-9", "description":"Indoor air: Determination of the emission of volatile organic compounds from building products and furnishing, Emission test chamber method", "normType":"International Testing Standards" } , { "id":"949", "name":"VDA 276", "description":"Determination of organic substances as emitted from automotive interior products", "normType":"Automobil Standards" } ] } , { "name":"BSB", "deviceName":"AirEvent", "category":"Emission", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/luftschadstoff-pruefschrank-typ-airevent", "randomNumber":"2", "norms": [ { "id":"950", "name":"IEC 60068-2-60", "description":"Flowing mixed gas corrosion test", "normType":"International Testing Standards" } , { "id":"951", "name":"ISO 60068-2-42", "description":"Sulphur dioxide test for contacts and connections", "normType":"International Testing Standards" } , { "id":"952", "name":"ISO 60068-2-43", "description":"Hydrogen sulphide test for contacts and connections", "normType":"International Testing Standards" } , { "id":"953", "name":"ISO 21207", "description":"Corrosion tests in artificial atmospheres", "normType":"International Testing Standards" } ] } , { "name":"FAPE", "deviceName":"EmissionEvent", "category":"Emission", "lang":"0", "link":"\/de\/produkte\/produkte-detail\/emissionevent-typ-voc-1000", "randomNumber":"0", "norms": [ { "id":"954", "name":"DIN EN ISO 12460-3", "description":"Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method", "normType":"International Testing Standards" } ] } ] }