weisstechnik designs and builds cleanroom environmental chambers for pharmaceutical production

Case Study

WHY – The Challenge.

A leading international pharmaceutical company ordered 6 cleanroom environmental
chambers for the production of a drug that treats a very rare metabolic disease.
The four cleanroom heated chambers for production and the cleanroom heated
chamber for storing the inoculum must maintain a constant temperature of 37 ºC.
The cleanroom cold chamber must be air-conditioned to 4 ºC and 40 % humidity.
All cleanroom chambers are to be designed according to ISO class 7.
The required production reliability calls for a particularly high degree of temperature
accuracy and for the climate control components to be designed with redundant
parts. To prevent the penetration of cold air from the outside, the heated
chambers should be equipped with a temperature-controlled anteroom. Cooling
should be provided by the existing central water cooling system.

HOW – The Idea.

Thanks to early participation in the project planning and the well-coordinated collaboration
with the other project partners, it was possible to develop the best possible
overall concept. The cleanrooms were integrated into environmental chambers in
order to simultaneously realize the required air purity and the required climatic
conditions. The environmental chambers were fitted with false ceilings with filter fan units and
integrated HEPA filters through which clean air is introduced into the chambers.
The clean air is returned via cleanable wall returns and into compact cooling units,
where it is reconditioned without every leaving the cleanroom space.
A chilled water cooling unit was connected to the on-site central chiller. The customized
cooling unit ensures precise control and consistent temperatures.

WHAT – The Solution.

The 4 cleanroom heated chambers for production are 54 sqm each, and the anterooms
are 9 sqm each. The cleanroom heated chamber for the inoculum is 14 sqm
and has an anteroom of 7 sqm. The cleanroom cold chamber measures 11 sqm.
The walls of the cleanroom environmental chambers are made of easy-to-clean
urethane foam insulating panels with 304 stainless steel surfaces both interior
and exterior. Pharmaceuticals can be safely produced in the cleanroom heated
chambers at a temperature of 37 °C. The cleanroom cold

Selected product: Life Science Walk-In Series with central water cooling system design basi

The cooling design was based upon the weisstechnik chilled water cooling unit (CWCU), which can regulate chamber
temperatures between 4 and 60 °C. The cooling units are served by 11 °C water for the five cleanroom heated
chambers and by -2 °C water for the cleanroom cold chamber. Redundant three-way valves and circulation pumps
guarantee the extremely high operational reliability that is required.

Special design features

  • weisstechnik turnkey services: Planning, installation, commissioning, service
  • Vapor tight, corrosion-free climate chamber made of stainless steel with CFC-free insulation
  • Cleanrooms with high or low room temperature
  • Maximum spatial deviation of +/- 1 °C
  • Environmentally friendly central water cooling for 6 cleanroom environmental chambers
  • Redundant cooling system components for worry-free operation and ease of maintenance

Case Study: Designs and builds cleanroom environmental chambers for pharmaceutical production